Answered
The response for updating a field can sometimes take up to 12 seconds . Too slow
ThingSpeak has an operational metric to respond to requests to update a channel within a few hundred milleseconds of receiving t...

ongeveer 3 jaar ago | 1

| accepted

Answered
How can I tweet regularly with ThingSpeak?
Twitter has limits that prevent you from tweeting the same message repeatedly. The key to using ThingTweet is to tweet a unique ...

ongeveer 3 jaar ago | 0

Answered
Thingspeak with MKR1000 example program from Arduino library 2.0.0 sends http error -301
The fact that it is stable with PC USB and unstable when powered by standalone USB suggests that perhaps the standalone USB is n...

ongeveer 3 jaar ago | 0

Answered
writing to multiple fields of
Try and log the values to the serial monitor. Do you see different values for each sensor? Also, maybe your code needs to be li...

ongeveer 3 jaar ago | 1

| accepted

Answered
MQTT subscribe retrieves no data back after immediate reply
I just tested the workflow with MQTT.fx and it works fine. Some points to remember: 1) When setting up the connection, set the ...

ongeveer 3 jaar ago | 0

Answered
ESP8266 - Write Single Field
You don't have the ThingSpeak library in your list of project dependencies in your PlatformIO.ini file. You need to add the Thin...

ongeveer 3 jaar ago | 0

Answered
GSM sends data but cant see them on my channel.
There are no known issues on the server end. You might want to check the connectivity on your end.

ongeveer 3 jaar ago | 0

| accepted

Answered
Apps React ThingSpeak IoT says it has been triggered but my Matlab script does not generate an Alert email
Most likely your MATLAB code is triggering the Alert API too frequently and is getting a HTTP 429 code. Take a look at the docum...

ongeveer 3 jaar ago | 0

Answered
Getting -401 error code when using WritingMulitpleFields
What is most likely happening is you are making requests to the server far exceeding your allowed data rate. One out of every 15...

ongeveer 3 jaar ago | 1

Answered
ThingSpeak graphs and thingSpeakRead stopped working at 20:08 BST
There are no known issues at this time. Channels are updating correctly. See for example: <https://thingspeak.com/channels/9> ...

ongeveer 3 jaar ago | 1

Answered
Only field1 is updating
What is likely happening is that the fields are being updated inidvidually, and faster than once per 15s. What you really want t...

ongeveer 3 jaar ago | 0

| accepted

Answered
pulse rate enable interrupt caused esp timeout
First, unless you have a paid ThingSpeak license, trying to update your channel every 5 seconds is a waste of resources. In fact...

meer dan 3 jaar ago | 0

Answered
Thingspeak.com yelling "getJSON request failed!"
The underlying issue has been fixed. A missing response header from the server caused your browser to not make any XHR requests....

meer dan 3 jaar ago | 0

| accepted

Answered
Can I track how often and who have viewed the shared channel of mine for a day or a month if I shared my private channels with others on ThingSpeak or ThingView?
There are ways to do this -- specifically, you can set up a MATLAB visualization on the channel that when loaded increments a fi...

meer dan 3 jaar ago | 2

| accepted

Answered
Bug in API response, Reading multiple Fields with ESP8266 Arduino Library.
I think looking at the response at one point in time is probably leading you to incorrect conclusions because the channel was up...

meer dan 3 jaar ago | 0

Answered
how can i solve this error appears when I try reading position
Your channel is empty, and you are trying to index into an empty array retrieved from the channel. Try this: data = thingSpeakR...

meer dan 3 jaar ago | 0

Answered
Connect to Sonoff bridge and temperature sensor
This blog entry has good instructions.

meer dan 3 jaar ago | 0

| accepted

Answered
Sensor data doesn't gets uploaded to thingspeak channel but it show on the serial monitor
If you have not purchased a ThingSpeak license, your maximum update rate is once every 15 seconds. I do not see where you are li...

meer dan 3 jaar ago | 0

Answered
value not getting uploaded
What troubleshooting have you done? Maybe you are updating your channel faster than once every 15 seconds? Share a link to yo...

meer dan 3 jaar ago | 0

Answered
Sending YF-S201 Flow meter data to ThingSpeak cloud
I take it you are using a free ThingSpeak account. This requires you to update the channel less frequently than once every 15s. ...

meer dan 3 jaar ago | 0

Answered
Time one hour less
What is the time zone of your account? You can log in to ThingSpeak and go to the 'My Profile' and see it.

meer dan 3 jaar ago | 0

| accepted

Channel

Channel controlled by MATLAB Appdesigner

meer dan 3 jaar ago

Answered
Gauge widget refresh phenomenon
I suspect this is on account of a slow internet connection. The gauge needs to make a request back to the server to update its v...

meer dan 3 jaar ago | 0

Answered
Read real time data on raspberry PI
Have you looked at the Raspberry Pi Support Package?

meer dan 3 jaar ago | 0

Answered
Read realtime data from ThingSpeak
If you are using MATLAB installed on your computer, you can install the MQTT in MATLAB toolbox, and subscribe to the channel you...

meer dan 3 jaar ago | 1

Answered
Arduino ESP32 stops posting to ThingSpeak after random times (error -301)
Thank you for trying to eliminate some of the potential issues and posting what you've tried before posting. That certainly help...

meer dan 3 jaar ago | 0

Answered
Grafana and Thingspeak API
I have this set up like this and it works: 1) Set up the datasource. In my case, I set up a new JSON API with this URL: https:/...

meer dan 3 jaar ago | 1

| accepted

Answered
Inconsistent values on sensor readings
From what I can tell by looking at your channel, the values seem to be within normal variation expected from these sensors. Why ...

meer dan 3 jaar ago | 0

Answered
Fast and easy plotting of extensive sets of GPS coordinates stored in ThingSpeak
MATLAB has the ability to write CSV, or more generally text files, in any format of your choice. See this documentation page. So...

meer dan 3 jaar ago | 1

Answered
Why I get only the last 36 hours?
To keep the application responsive and have a usable experience on the web site, we limit the number of points retrieved to a ma...

meer dan 3 jaar ago | 0