Main Content

inlineComponent

Remove reference architecture or behavior from component

Description

example

componentObj = inlineComponent(component,inlineFlag) retains the contents of the architecture model referenced by the specified component and breaks the link to the reference model. If inlineFlag is set to 0 (false), then the contents of the architecture model are removed and only interfaces remain. You can also use inlineComponent to remove Stateflow® chart and Simulink® behaviors from a component or to remove Simulink model or subsystem behaviors referenced by a component.

Examples

collapse all

Save the component robotComp in the architecture model Robot.slx and reference it from another component, electricComp, so that the electricComp component uses the architecture of the robotComp component. Remove the architecture reference from the robotComp component so that its architecture can be edited independently.

Create a model archModel.slx.

model = systemcomposer.createModel("archModel",true);
arch = get(model,"Architecture");

Add two components to the model with the names "electricComp" and "robotComp".

names = ["electricComp","robotComp"];
comp = addComponent(arch,names);

Save the robotComp component in the Robot.slx model so the component references the model.

saveAsModel(comp(2),"Robot");

Link the electricComp component to the same model Robot.slx so it uses the architecture of the original robotComp component and references the architecture model Robot.slx.

linkToModel(comp(1),"Robot");

Remove the architecture reference from the robotComp component while retaining the contents, so that its architecture can be edited independently, breaking the link to the referenced model.

inlineComponent(comp(2),true);

Clean up the model.

Simulink.BlockDiagram.arrangeSystem("archModel"); 

Add a Stateflow chart behavior to the component named robotComp within the current model. Then, remove the behavior.

Create a model archModel.slx.

model = systemcomposer.createModel("archModel",true);
arch = get(model,"Architecture");

Add two components to the model with the names "electricComp" and "robotComp".

names = ["electricComp","robotComp"];
comp = addComponent(arch,names);

Add Stateflow chart behavior model to the robotComp component.

createStateflowChartBehavior(comp(2));

Remove Stateflow chart behavior from the robotComp component and remove all contents of the Stateflow chart.

inlineComponent(comp(2),false);

Clean up the model.

Simulink.BlockDiagram.arrangeSystem("archModel"); 

Input Arguments

collapse all

Component linked to an architecture model, specified as a systemcomposer.arch.Component object.

Control of contents of component, specified as a logical 1 (true) if contents of the referenced architecture model are copied to the component architecture and 0 (false) if the contents are not copied and only ports and interfaces are preserved.

Data Types: logical

Output Arguments

collapse all

Component with referenced architecture or behavior removed, returned as a systemcomposer.arch.Component object.

More About

collapse all

Definitions

TermDefinitionApplicationMore Information
architecture

A System Composer™ architecture represents a system of components and how they interface with each other structurally and behaviorally. You can represent specific architectures using alternate views.

Different types of architectures describe different aspects of systems:

  • Functional architecture describes the flow of data in a system.

  • Logical architecture describes the intended operation of a system.

  • Physical architecture describes the platform or hardware in a system.

Compose Architecture Visually
model

A System Composer model is the file that contains architectural information, including components, ports, connectors, interfaces, and behaviors.

Perform operations on a model:

  • Extract the root-level architecture contained in the model.

  • Apply profiles.

  • Link interface data dictionaries.

  • Generate instances from model architecture.

A System Composer model is stored as an SLX file.

Create Architecture Model with Interfaces and Requirement Links
component

A component is a nontrivial, nearly independent, and replaceable part of a system that fulfills a clear function in the context of an architecture. A component defines an architectural element, such as a function, a system, hardware, software, or other conceptual entity. A component can also be a subsystem or subfunction.

Represented as a block, a component is a part of an architecture model that can be separated into reusable artifacts.

Components
port

A port is a node on a component or architecture that represents a point of interaction with its environment. A port permits the flow of information to and from other components or systems.

There are different types of ports:

  • Component ports are interaction points on the component to other components.

  • Architecture ports are ports on the boundary of the system, whether the boundary is within a component or the overall architecture model.

Ports
connector

Connectors are lines that provide connections between ports. Connectors describe how information flows between components or architectures.

A connector allows two components to interact without defining the nature of the interaction. Set an interface on a port to define how the components interact.

Connections

TermDefinitionApplicationMore Information
reference component

A reference component is a component whose definition is a separate architecture model, Simulink behavior model, or Simulink subsystem behavior. A reference component represents a logical hierarchy of other compositions.

You can reuse compositions in the model using reference components. There are three types of reference components:

  • Model references are Simulink models.

  • Subsystem references are Simulink subsystems.

  • Architecture references are System Composer architecture models.

parameter definition

A parameter definition is the definition of a property that has instance semantics. A parameter definition specifies attributes such as name, data type, default value, and units.

Parameter definitions can be specified as model arguments on a Simulink model or a System Composer architecture model.

Access Model Arguments as Parameters on Reference Components
parameter

A parameter is an instance-specific value of a parameter definition. A parameter captures instance-specific values and units.

Parameters are available for each component linking to a model reference or architecture reference that specifies model arguments. You can specify independent values for a parameter on each component.

Use Parameters to Store Instance Values with Components
subsystem component

A subsystem component is a Simulink subsystem that is part of the parent System Composer architecture model.

Add Simulink subsystem behavior to a component to author a subsystem component in System Composer. You cannot synchronize and reuse subsystem components as Reference Component blocks because the component is part of the parent model.

state chart

A state chart diagram demonstrates the state-dependent behavior of a component throughout its state lifecycle and the events that can trigger a transition between states.

Add Stateflow chart behavior to describe a component using state machines. You cannot synchronize and reuse Stateflow chart behaviors as Reference Component blocks because the component is part of the parent model.

Version History

Introduced in R2019a