Getting Started 

Explore wireless design examples, articles, and tutorials.

Massive MIMO and Beamforming

This example introduces the basic concept of hybrid beamforming and shows how to simulate such a system.

Channel Modeling and RF Propagation

Construct a 5G urban macro-cell test environment and visualize the signal-to-interference-plus-noise ratio (SINR) on a map. The test environment is based on the guidelines defined in Report ITU-R M.[IMT-2020.EVAL] for evaluating 5G radio technologies.

RF Transceivers

Build a cascade of RF components with RF Toolbox and analyze the link budget in terms of noise figure, gain, and IP3.

Antenna Modeling and Design

5G and LTE Mobile Communications Standards

This example shows how to generate LTE-Advanced Pro Release 13 Narrowband IoT (NB-IoT) waveforms for test and measurement applications

WLAN and Connectivity Standards

This example shows the transmit and receive processing for an IEEE® 802.11ax™ multi-user downlink transmission over a TGax indoor fading channel.

Software-Defined Radio

This example shows how to use the Xilinx® Zynq-based radio support package with MATLAB and LTE Toolbox to generate an LTE transmission.

Hardware Design and Verification

Get an overview of the Wireless HDL Toolbox 5G NR signal synchronization block (SSB) detection and decoding FPGA implementation.

Deep Learning for Communications