lsim and transfer fcn block in simulink output different results
2 views (last 30 days)
Show older comments
I simulate the same transfer function with lsim and transfer fcn block in simulink but I ended up with different results.
In Simulink, the block diagram is shown as follows, the input signal is ua = 400sin(2*pi*50*t), the sampling frequency is 10 kHz![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/873490/image.png)
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/873490/image.png)
In matlab, the code is shown following, ua is the data from simulink and the same for ua.
numerator = [ 1 ];
denominator = [1 1];
sys = tf(numerator, denominator);
matlab_ia = lsim(sys, ua, t_simu);
Technically, they're exact the same with no differences, but when I got the error between them and drew them out, I get :
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/873495/image.png)
Although it's really small, it's not tolerable for my later application, which is used for PSO to find the transfer function.
Simulink transfer fcn block actually gave the closer results, but there's no PSO block in Simulink.
So I wondered why the lsim and transfer function generated different results and how I can use the lsim to get the same results as transfer function block or are there other alternative function in matlab.
There're similar questions but I didn't find those answering my questions.
0 Comments
Accepted Answer
Paul
on 25 Jan 2022
Edited: Paul
on 25 Jan 2022
Simulink uses a continuous-time differential equation solver. The specific solver and solver parameters, like step size information, are in the model settings.
lsim() in the Control System Toolbox converts sys to a discrete time approximation assuming either a first- or zero-order-hold and then propagates the difference equations.
So it's not a surpise that the two results are not identical. The size of the difference between them will depend on the the block parameters entered for Ua, particularly the sample time, the Simulink solver and solver parameters, and the 'method' argument to lsim().
0 Comments
More Answers (0)
See Also
Categories
Find more on General Applications in Help Center and File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!