how to design radiation pattern of ideal dipole antenna
36 views (last 30 days)
Show older comments
how to design radiation pattern of ideal dipole antenna in matlab.
0 Comments
Answers (1)
Chaitanya
on 11 Jul 2023
To design the radiation pattern of an ideal dipole antenna in MATLAB, you can use the following code:
% Constants
c = physconst('LightSpeed'); % Speed of light
f = 2.4e9; % Frequency of operation (in Hz)
lambda = c / f; % Wavelength
% Define the range of theta and phi values
theta = linspace(0, pi, 100);
phi = linspace(0, 2*pi, 200);
% Calculate the radiation pattern
E_theta = abs(sin(theta)); % E-field component in the theta direction
E_phi = zeros(size(theta)); % E-field component in the phi direction (for a dipole antenna)
% Calculate the total E-field magnitude
E_mag = sqrt(E_theta.^2 + E_phi.^2);
% Convert the E-field magnitude to dB scale
E_mag_dB = 20*log10(E_mag);
% Convert theta and phi to meshgrid for 3D plotting
[theta_mesh, phi_mesh] = meshgrid(theta, phi);
% Convert spherical coordinates to Cartesian coordinates
x = E_mag .* sin(theta_mesh) .* cos(phi_mesh);
y = E_mag .* sin(theta_mesh) .* sin(phi_mesh);
z = E_mag .* cos(theta_mesh);
% Plot the radiation pattern in dB scale
figure;
surf(x, y, z, E_mag_dB, 'EdgeColor', 'none');
axis equal;
colorbar;
title('Radiation Pattern of Ideal Dipole Antenna');
xlabel('x');
ylabel('y');
zlabel('z');
In this code, the theta variable represents the elevation angle and phi represents the azimuth angle. You can adjust the f variable to set the frequency of operation for the dipole antenna.
The code calculates the E-field components in the theta and phi directions based on the ideal dipole antenna radiation pattern. It then calculates the total E-field magnitude and converts it to dB scale.
The meshgrid function is used to create a grid of theta and phi values for 3D plotting. The spherical coordinates are then converted to Cartesian coordinates (x, y, z) for visualization.
Finally, the radiation pattern is plotted using the surf function in MATLAB, with the E-field magnitude in dB scale represented by the color of the surface. The axis equal command ensures that the plot has equal scaling in all dimensions, and the colorbar function adds a colorbar to the plot. The title, xlabel, ylabel, and zlabel functions are used to label the plot.
You can run this code in MATLAB to visualize the radiation pattern of an ideal dipole antenna in 3D, with the E-field magnitude represented in dB scale.
Hope this helps!
0 Comments
See Also
Categories
Find more on Antennas and Electromagnetic Propagation in Help Center and File Exchange
Products
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!