Worflow advisor tcl scripts generates error at programming phase

2 views (last 30 days)
Hello,
Advisor section "4.4 Program Target Device" will pick any device with xilinx or digilent interface and will cause programming error.
I do have multiple devices on usb ports which uses same kind of interface. HDL Workflow advisor tcl scripts can not identify correct one. I checked tcl script and line "current_hw_target [get_hw_targets *]" is trying to find any device. But problem is that there is two or three devices already present.
How to edit this tcl script permanently? It will be generated again in every time and modifications will be over written.
Best Regards Antti

Accepted Answer

Wang Chen
Wang Chen on 6 Oct 2015
Hi Antti,
This is a limitation of current HDL Workflow Advisor (R2015b). There is no option to configure the JTAG programming. The work-around is to open the Vivado project using the link in "Create Project" task, and program the FPGA through Vivado. Or you have to leave only one JTAG device connected.
We are working on improving the tool for the coming releases to provide more customization for programming methods.
Best Regards, Wang
  2 Comments
Balazs
Balazs on 18 Nov 2015
I also get an error at Section 4.4 of Workflow Advisor (Matlab R2015b, Vivado 2015.3).
Matlab generates the 'vivado_download.tcl' script with the following command:
connect_hw_server -host localhost -port 60001
but these arguments are deprecated in the Vivado 2015.3
the current syntax would be, according to Vivado help:
connect_hw_server [-url < arg >]
Balazs
Balazs on 18 Nov 2015
I also get an error at Section 4.4 of Workflow Advisor (Matlab R2015b, Vivado 2015.3).
Matlab generates the 'vivado_download.tcl' script with the following command:
connect_hw_server -host localhost -port 60001
but these arguments are deprecated in the Vivado 2015.3
the current syntax would be, according to Vivado help:
connect_hw_server [-url < arg >]

Sign in to comment.

More Answers (1)

Balazs
Balazs on 18 Nov 2015
I also get an error at Section 4.4 of Workflow Advisor (Matlab R2015b, Vivado 2015.3).
Matlab generates the 'vivado_download.tcl' script with the following command:
connect_hw_server -host localhost -port 60001
but these arguments are deprecated in the Vivado 2015.3
the current syntax would be, according to Vivado help:
connect_hw_server [-url < arg >]

Tags

Products

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!