Assignment vehicle model longitudal

Hello. When executing this script I get an error. I have no clue what I did wrong. It has to do something with "tout". The script should work together with the simulink document. In the attachment I have uploaded the assignment.

%

%

%

close all; clear; clc; format short; format compact;

%

% Parameters

T = 110; % Torque [Nm] 110 @4000 [rpm]

rpm = 4000; % rpm in

f0 = 123.6; % static roll resistance [N]

f1 = 1.007; % dynamic roll resistance [N/(km/h)]

f2 = 0.02978; % Air resistance [N/(km/h)^2];

A = 2.01; % Vehicle Frontal Area [m²]

Cd = 0.32; % Drag coefficient [-]

Rho = 1.25; % Air density [kg/m^3]

m = 1145; % Mass [kg]

r = 0.298; % Wheel Radius [m]

Crr = -0.011; % Static Rolling Resistance (Crr) [-]

AirDensity = 1.22; % Air density [kg/m³]

G = 9.81; % Gravitational Acceleration [m/s²]

SimTime = 6; % [s] simulatietijd

% simulatie model

sim("Assignment_Vehicle_simulink_model_2712")

%%Plotten

figure;

plot(out.tout, Snelheid); grid on;

xlabel('Torque [Nm]'); ylabel('snelheid [m/s]');

title ('Voertuigsnelheid');

Answer 1

[Fangjun Jiang]

"tout" is the time ouput variable created after a successful simulation.

In your model, press Ctrl+E, make sure these two options are checked.