i am trying to import a creo cad model in Simscape, but the visualisation is very strange.Attaching the how the model looks like after import and how it originally looks

%%As you see, the matlab simscape models comes out like blobs as compared to the original creo model%%

Answer 1

[Abhijeet Singh]

Hi Eeshan,

I understand that you are trying to import a Creo CAD model in Simscape but the visualisation is distorted.

It seems that the distortion in the imported model may be due to a corrupted or incomplete export of the Creo CAD model. To address this issue, I recommend trying the following troubleshooting methods to ensure that the model is exported and imported properly in SimScape Multibody:

1. Export the model using the guidelines provided in the following documentation: https://www.mathworks.com/help/smlink/ug/export-robot-assembly-from-proengineer-software.html

2. Import the model using the instructions outlined in the documentation: https://www.mathworks.com/help/sm/ug/import-robot-arm-model.html

By carefully following the steps mentioned in the documentation, it should be possible to import the Creo CAD model in SimScape Multibody.

I hope this information proves helpful in resolving the issue.

Thanks