DTC-SVPWM for 4-phase SRM

11 views (last 30 days)
Mohammed Amin
Mohammed Amin on 14 May 2023
Hello,
I need help with my simulink simulation for DTC-SVPWM of 4-phase switched reluctance motor in order to finish my project of Master's degree. I am struggling and having difficulties in desingning the necessary blocks for of the SVPWM.
Can you help me to get the space vector pulse width modulation for the case of 4-phases, please ?
Thank you all
  1 Comment
Meznane Aymen Oussama
Meznane Aymen Oussama on 12 Mar 2024
hello amin can you give me simulation for DTC-SVPWM of 4-phase switched reluctance motor in order to finish my project you will help me a lot

Sign in to comment.

Accepted Answer

Shaik
Shaik on 14 May 2023
Hi Amin,
Certainly, I can provide some guidance on implementing space vector pulse width modulation (SVPWM) for a 4-phase switched reluctance motor in Simulink.
The first step is to define the reference signals for the SVPWM. For a 4-phase motor, you will need to generate four reference signals, one for each phase. The reference signals will represent the desired DC voltage level for each phase, which will be used to generate the pulse width modulated output signals.
Next, you will need to generate the switching signals for the inverter. You can generate the switching signals using the SVPWM algorithm, which involves calculating the duty cycles for each phase based on the reference signals and the position of the space vector.
In Simulink, you can use the "Space Vector PWM" block to implement the SVPWM algorithm. This block takes in the reference signals for each phase, as well as the electrical angle of the rotor, and outputs the PWM signals for each phase. You can connect the outputs of the "Space Vector PWM" block to the gate driver output blocks that control the inverter switches.
  1 Comment
Mohammed Amin
Mohammed Amin on 14 May 2023
Hi Shaik,
Thank you for answering my question. Well, for more understanding, I am using PI controllers for both flux and torque (after estimating the flux and torque through alpha-beta voltages and currents generated from the converter ) where their outputs are going to be connected to the SVM block. Here i find a problem with the connections and the SVPMW block.

Sign in to comment.

More Answers (0)

Categories

Find more on Specialized Power Systems in Help Center and File Exchange

Products


Release

R2018a

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!