Clear Filters
Clear Filters

I want to send data to ThingSpeak using Arduino

2 views (last 30 days)
Currently, GPS data is acquired using Arduino on Simulink.
I want to send this data to ThingSpeak.
How should I set the microcomputer board?
Thank you very much!
  6 Comments
Nakul Khadilkar
Nakul Khadilkar on 13 Apr 2022
Hi Seiya,
What WiFi shield are you using with the Mega?
seiya moro
seiya moro on 14 Apr 2022
Edited: seiya moro on 14 Apr 2022
Hi,
Now, I am using SHIELD-ESP-WIFI REV 2.0. with the Mega.
Also, is there a Wifi shield that I should buy?
Thank you very much.

Sign in to comment.

Answers (2)

Vinod
Vinod on 14 Apr 2022
Edited: Vinod on 14 Apr 2022
The question title says "I want to send data to ThingSpeak using Arduino", which is answered by the answer here.
If you are interested in sending data to ThingSpeak using Simulink and Arduino, I would recommend watching this video as a starting point.
or this one:
  1 Comment
seiya moro
seiya moro on 18 Apr 2022
Hi Vinod,
Sorry for the late reply.
I think it will be very helpful.
I will try this method.
Thank you very much!

Sign in to comment.


Jan Maly
Jan Maly on 13 Apr 2022
Hello,
try bellow code, works for me.
#include <WiFiClientSecure.h> // you need this library, cos Thingspeak use SSL protocoal, so standard WIFIClient is not able to connect there
const char* ssid = "SSID name";
const char* password = "your password";
WiFiClientSecure client;
void connectToWIFI() {
Serial.print("Attempting to connect to SSID: ");
Serial.println(ssid);
WiFi.mode(WIFI_STA);
WiFi.begin(ssid, password);
while (WiFi.status() != WL_CONNECTED) {
Serial.print(WiFi.status());
delay(1000);
}
Serial.println("WiFi connected");
Serial.println("IP address: ");
Serial.println(WiFi.localIP());
}
void setup() {
Serial.begin(115200);
connectToWIFI();
}
void loop() {
httpRequestData = "api_key=YOURAPIKEY&field1=22.32&field22=12.89; //up to field 8
responseTime = millis();
Serial.println(" Starting connection to server thingspeak");
Serial.println(httpRequestData);
client.setInsecure(); //skip SSL verification
if (!client.connect("api.thingspeak.com", 443, 10000)) {
Serial.println("Connection failed! Reconnect!");
connectToWIFI();
} else {
Serial.print(" Connected to server!");
client.println("GET https://api.thingspeak.com/update?" + httpRequestData + " HTTP/1.0");
client.println("Host: api.thingspeak.com");
client.println("Connection: close");
client.println();
while (client.connected()) {
String line = client.readStringUntil('\n');
if (line == "\r") {
Serial.print(" Headers received "); // or display lito to get return code
break;
}
}
Serial.println(millis() - responseTime); //response time in miliseconds
client.stop();
}
}
be carefully, today i found, that only one request per 15 seconds can be send
  3 Comments
Jan Maly
Jan Maly on 14 Apr 2022
Sorry, no idea. This is pure wire language. I use Arduino IDE software, to connect to device via USB and upload code above.

Sign in to comment.

Communities

More Answers in the  ThingSpeak Community

Categories

Find more on Arduino Hardware in Help Center and File Exchange

Products


Release

R2021a

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!