MATLAB and Simulink Training

Course Details

This hands-on, four-half day course focuses on developing and configuring models in Simulink® and deploying on Xilinx® Zynq®-7000 All Programmable SoCs. The course is designed for Simulink users who intend to generate, validate, and deploy embedded code and HDL code for software/hardware codesign using Embedded Coder® and HDL Coder™.

Topics include:

  • Zynq platform overview and environment setup
  • Introduction to Embedded Coder and HDL Coder
  • IP core generation and deployment
  • Using AXI4 interface
  • Processor-in-the-loop verification
  • Data interface with real-time application
  • Integrating device drivers
  • Custom reference design

Day 1 of 4


Zynq Platform Overview and Environment Setup

Objective: Configure Zynq-7000 platform and MATLAB environment.

  • Zynq-7000 overview
  • Setting up Zynq platform and software
  • Configuring MATLAB environment
  • Testing connectivity to Zynq hardware

Introduction to Embedded Coder and HDL Coder

Objective: Configure Simulink models for embedded code generation and effectively interpret the generated code.

  • Architecture of an embedded application
  • Generating ERT code
  • Code modules
  • Data structures in generated code
  • Configuring a Simulink model for HDL code generation
  • Using HDL Workflow Advisor

IP Core Generation and Deployment

Objective: Use HDL Workflow Advisor to configure a Simulink model, generate and build both HDL and C code, and deploy to Zynq platform.

  • Configuring a subsystem for programmable logic
  • Configuring the target interface and peripherals
  • Generating the IP core and integrating with SDK
  • Building and deploying the FPGA bitstream
  • Generating and deploying a software interface model
  • Tuning parameters with External Mode

Day 2 of 4


Using AXI4 Interface

Objective: Use various AXI interfaces for data communication between processing system and programmable logic.

  • AXI interface overview
  • AXI4-Lite applications
  • Using AXI4-Stream
  • AXI4 performance considerations

Processor-in-the-Loop Verification

Objective: Use processor-in-the-loop to verify the algorithm running on Zynq platform and profile the execution times in your production algorithm.

  • Processor-in-the-loop (PIL) workflow on Zynq
  • PIL verification with model reference
  • Code execution profiling with PIL
  • PIL considerations

Day 3 of 4


Data Interface with Real-Time Application

Objective: Use the UDP interface to stream data between Simulink and the real-time application running on Zynq platform.

  • Data interface overview
  • Configuring UDP blocks for data streaming
  • Synchronizing data between Simulink and Zynq
  • Data interface with AXI Stream
  • Design partitioning
  • Data interface considerations

Integrating Device Drivers

Objective: Develop device driver interfaces for integrating peripherals on processing system.

  • Workflow for developing device drivers
  • Using the Legacy Code Tool
  • GPIO interface
  • Cross-compiling device drivers

Day 4 of 4


Custom Reference Design

Objective: Create and package reusable IP for Vivado and register custom boards and reference designs.

  • Motivations for a custom reference design
  • Creating reusable IP for Vivado
  • Reference design overview
  • Customizing a reference design
  • Registering board and custom reference design

Level: Intermediate

Duration: 4 half-days

Languages: English, 한국어

View schedule and enroll