Direct search often runs faster if you *vectorize* the
objective and nonlinear constraint functions. This means your functions
evaluate all the points in a poll or search pattern at once, with
one function call, without having to loop through the points one at
a time. Therefore, the option `UseVectorized`

= `true`

works
only when `UseCompletePoll`

or `UseCompleteSearch`

is
also set to `true`

. However, when you set `UseVectorized`

= `true`

, `patternsearch`

checks
that the objective and any nonlinear constraint functions give outputs
of the correct shape for vectorized calculations, regardless of the
setting of the `UseCompletePoll`

or `UseCompleteSearch`

options.

If there are nonlinear constraints, the objective function and the nonlinear constraints all need to be vectorized in order for the algorithm to compute in a vectorized manner.

**Note**

Write your vectorized objective function or nonlinear constraint
function to accept a matrix with an arbitrary number of points. `patternsearch`

sometimes
evaluates a single point even during a vectorized calculation.

A vectorized objective function accepts a matrix as input and
generates a vector of function values, where each function value corresponds
to one row or column of the input matrix. `patternsearch`

resolves
the ambiguity in whether the rows or columns of the matrix represent
the points of a pattern as follows. Suppose the input matrix has `m`

rows
and `n`

columns:

If the initial point

`x0`

is a column vector of size`m`

, the objective function takes each column of the matrix as a point in the pattern and returns a row vector of size`n`

.If the initial point

`x0`

is a row vector of size`n`

, the objective function takes each row of the matrix as a point in the pattern and returns a column vector of size`m`

.If the initial point

`x0`

is a scalar,`patternsearch`

assumes that`x0`

is a row vector. Therefore, the input matrix has one column (`n`

= 1, the input matrix is a vector), and each entry of the matrix represents one row for the objective function to evaluate. The output of the objective function in this case is a column vector of size`m`

.

Pictorially, the matrix and calculation are represented by the following figure.

**Structure of Vectorized Functions**

For example, suppose the objective function is

$$f(x)={x}_{1}^{4}+{x}_{2}^{4}-4{x}_{1}^{2}-2{x}_{2}^{2}+3{x}_{1}-{x}_{2}/2.$$

If the initial vector `x0`

is
a column vector, such as `[0;0]`

, a function for
vectorized evaluation is

function f = vectorizedc(x) f = x(1,:).^4+x(2,:).^4-4*x(1,:).^2-2*x(2,:).^2 ... +3*x(1,:)-.5*x(2,:);

`x0`

is a row vector, such as `[0,0]`

,
a function for vectorized evaluation isfunction f = vectorizedr(x) f = x(:,1).^4+x(:,2).^4-4*x(:,1).^2-2*x(:,2).^2 ... +3*x(:,1)-.5*x(:,2);

**Tip**

If you want to use the same objective (fitness) function for
both pattern search and genetic algorithm, write your function to
have the points represented by row vectors, and write `x0`

as
a row vector. The genetic algorithm always takes individuals as the
rows of a matrix. This was a design decision—the genetic algorithm
does not require a user-supplied population, so needs to have a default
format.

To minimize `vectorizedc`

, enter the following commands:

options=optimoptions('patternsearch','UseVectorized',true,'UseCompletePoll',true); x0=[0;0]; [x,fval]=patternsearch(@vectorizedc,x0,... [],[],[],[],[],[],[],options)

MATLAB^{®} returns the following output:

Optimization terminated: mesh size less than options.MeshTolerance. x = -1.5737 1.0575 fval = -10.0088

Only nonlinear constraints need to be vectorized; bounds and linear constraints are handled automatically. If there are nonlinear constraints, the objective function and the nonlinear constraints all need to be vectorized in order for the algorithm to compute in a vectorized manner.

The same considerations hold for constraint functions as for
objective functions: the initial point `x0`

determines
the type of points (row or column vectors) in the poll or search.
If the initial point is a row vector of size *k*,
the matrix *x* passed to the constraint function
has *k* columns. Similarly, if the initial point
is a column vector of size *k*, the matrix of poll
or search points has *k* rows. The figure Structure of Vectorized Functions may make
this clear. If the initial point is a scalar, `patternsearch`

assumes
that it is a row vector.

Your nonlinear constraint function returns two matrices, one
for inequality constraints, and one for equality constraints. Suppose
there are *n _{c}* nonlinear inequality
constraints and

`x0`

, the constraint
matrices have `x0`

, the constraint
matrices have Suppose that the nonlinear constraints are

$$\begin{array}{c}\frac{{x}_{1}^{2}}{9}+\frac{{x}_{2}^{2}}{4}\le 1\text{(theinteriorofanellipse),}\\ {x}_{2}\ge \mathrm{cosh}\left({x}_{1}\right)-1.\end{array}$$

Write a function for these constraints for row-form `x0`

as
follows:

function [c ceq] = ellipsecosh(x) c(:,1)=x(:,1).^2/9+x(:,2).^2/4-1; c(:,2)=cosh(x(:,1))-x(:,2)-1; ceq=[];

Minimize `vectorizedr`

(defined in Vectorized Objective Function) subject to the constraints
`ellipsecosh`

:

x0=[0,0]; options = optimoptions('patternsearch','UseVectorized',true,'UseCompletePoll',true); [x,fval] = patternsearch(@vectorizedr,x0,... [],[],[],[],[],[],@ellipsecosh,options)

MATLAB returns the following output:

Optimization terminated: mesh size less than options.MeshTolerance and constraint violation is less than options.ConstraintTolerance. x = -1.3516 1.0612 fval = -9.5394