Array-Vector Divide
Divide array by vector along specified dimension
Libraries:
DSP System Toolbox /
Math Functions /
Matrices and Linear Algebra /
Matrix Operations
Description
The Array-Vector Divide block divides the values in the specified dimension of the N-dimensional input array A by the values in the input vector V. The Array-Vector Divide block divides each element of V by the corresponding element along that dimension of A.
For more information on how the block computes the output, see Algorithms.
Ports
Input
A — Input array
scalar | vector | matrix | N-D array
Specify the input array as a scalar, vector, matrix, or an N-D array.
If the input is fixed point, it must be a signed integer or a signed fixed point value with a power-of-two slope and zero bias.
Data Types: single
| double
| int8
| int16
| int32
| fixed point
Complex Number Support: Yes
V — Vector to divide
vector
Specify the vector V to divide as a vector of length equal to the length of the specified dimension in input A.
Dependencies
To enable this parameter, set the Vector (V)
source parameter to Input
port
.
Data Types: single
| double
| int8
| int16
| int32
| fixed point
Complex Number Support: Yes
Output
Output — Output
scalar | vector | matrix | N-D array
The output of the Array-Vector Divide block, returned as a scalar, vector, matrix, or an N-D array. The output always has the same size, data type, and complexity as the input signal.
For more information on how the block computes the output, see Algorithms.
Data Types: single
| double
| int8
| int16
| int32
| fixed point
Complex Number Support: Yes
Parameters
Main Tab
Divide along dimension — Dimension along which to divide
1
(default) | positive integer
Specify the dimension along which to divide the input array A by the elements of vector V as a positive integer. The value of this parameter must be less than or equal to the number of dimensions of input A.
Vector (V) source — Source of vector V
Input port
(default) | Dialog parameter
Specify the source of the vector V as one of these:
Input port
–– Use the input port V to specify the vector.Dialog parameter
–– Use the Vector (V) dialog parameter to specify the vector.
Vector (V) — Vector to divide
[0.5 0.25]
(default) | vector
Specify the vector V to divide as a vector of length equal to the length of the specified dimension in input A.
Dependencies
This parameter is visible only when you select Dialog
parameter
for the Vector (V)
source parameter.
Data Types Tab
Note
Floating-point inheritance takes precedence over the data type settings defined on this tab. When inputs are floating point, the block ignores these settings, and all internal data types are floating point.
Rounding mode — Rounding mode
Floor
(default) | Ceiling
| Convergent
| Nearest
| Round
| Simplest
| Zero
Specify the rounding mode for fixed-point operations as one of the following:
Floor
Ceiling
Convergent
Nearest
Round
Simplest
Zero
For more details, see Rounding Modes.
Saturate on integer overflow — Saturate on integer overflow
off
(default) | on
When you select this parameter, the block saturates the result of its
fixed-point operation. When you clear this parameter, the block wraps
the result of its fixed-point operation. For details on
saturate
and wrap
, see overflow
mode for fixed-point operations.
Vector (V) — Vector data type
Inherit: Same word length as
input
(default) | fixdt(1,16,0)
Use this parameter to specify the word and fraction lengths for the elements of the vector, V. You can set this parameter to:
A rule that inherits a data type, for example,
Inherit: Same word length as input
An expression that evaluates to a valid data type, for example,
fixdt(1,16,0)
Click the Show data type assistant button to display the Data Type Assistant, which helps you set the Vector (V) data type parameter.
See Specify Data Types Using Data Type Assistant (Simulink) for more information.
Note
When you specify the vector through the block's input port, the data type and scaling of its elements are inherited from the driving block.
Dependencies
The Vector (V) parameter on the
Data Types tab is visible only when
you select Dialog parameter
for the
Vector (V) source parameter on the
Main tab of the block mask.
Output — Output data type
Inherit: Same as first
input
(default) | fixdt([],16,0)
Specify the output data type. See Fixed-Point Data Types for illustrations depicting the use of the output data type in this block. You can set this parameter to:
A rule that inherits a data type, for example,
Inherit: Same as first input
An expression that evaluates to a valid data type, for example,
fixdt([],16,0)
Click the Show data type assistant button to display the Data Type Assistant, which helps you set the Output parameter.
See Control Data Types of Signals (Simulink) for more information.
Output Minimum — Output minimum
[]
(default) | scalar
Specify the minimum value that the block should output. The default
value is []
(unspecified). Simulink® uses this value to perform:
Simulation range checking (see Specify Signal Ranges (Simulink))
Automatic scaling of fixed-point data types
Output Maximum — Output maximum
[]
(default) | scalar
Specify the maximum value that the block should output. The default
value is []
(unspecified). Simulink uses this value to perform:
Simulation range checking (see Specify Signal Ranges (Simulink))
Automatic scaling of fixed-point data types
Lock data type settings against changes by the fixed-point tools — Prevent fixed-point tools from overriding data types
off
(default) | on
Select this parameter to prevent the fixed-point tools from overriding the data types you specify in the block dialog box.
Block Characteristics
Data Types |
|
Direct Feedthrough |
|
Multidimensional Signals |
|
Variable-Size Signals |
|
Zero-Crossing Detection |
|
More About
Fixed-Point Data Types
This diagram shows the data types used within the Array-Vector Divide block for fixed-point signals.
When you specify the vector V on the Main tab of the block mask, you must specify the data type and scaling properties of its elements in the Vector (V) parameter on the Data Types tab. When the vector comes in through the block port, its elements inherit their data type and scaling from the driving block.
You can set the vector and output data types in the block dialog box.
Algorithms
The Array-Vector Divide block divides each element of V by the corresponding element along that dimension of A.
Consider a 3-D M-by-N-by-P input
array
A(i,j,k)
and an N-by-1 input vector V. When the
Divide along dimension parameter is set to
2
, the output of the block
Y(i,j,k)
is given by
where:
Extended Capabilities
C/C++ Code Generation
Generate C and C++ code using Simulink® Coder™.
Fixed-Point Conversion
Design and simulate fixed-point systems using Fixed-Point Designer™.
Version History
Introduced in R2007b
MATLAB Command
You clicked a link that corresponds to this MATLAB command:
Run the command by entering it in the MATLAB Command Window. Web browsers do not support MATLAB commands.
Select a Web Site
Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: .
You can also select a web site from the following list:
How to Get Best Site Performance
Select the China site (in Chinese or English) for best site performance. Other MathWorks country sites are not optimized for visits from your location.
Americas
- América Latina (Español)
- Canada (English)
- United States (English)
Europe
- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)
- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- United Kingdom (English)