With the toolbox you can use multiple devices and achieve various analog
measurement types, including temperature, current, and accelerometer.
Acquire and generate data using two National Instruments modules operating at the same time.
Synchronously generate and acquire voltage data at a rate of 300 kHz.
Use function generator channels to generate a 1 kHz sinusoidal waveform, and record data at the same time, using an analog input channel.
Use function generator channels to generate an arbitrary 1kHz waveform function, and record data at the same time, using an analog input channel.
Use MATLAB to connect to an Analog Devices ADALM1000 source-measurement unit, configure it, and make current and voltage measurements to characterize an LED.
Use MATLAB to connect to an ADALM1000 source-measurement unit, configure it to generate an arbitrary signal, make live measurements, and use the measurements to calculate the transfer function of the connected circuit.
You clicked a link that corresponds to this MATLAB command:
Run the command by entering it in the MATLAB Command Window.
Web browsers do not support MATLAB commands.
Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: .
You can also select a web site from the following list:
Select the China site (in Chinese or English) for best site performance. Other MathWorks country sites are not optimized for visits from your location.
Contact your local office
Get trial now