MATLAB and Simulink Requirements

MATLAB R2024b System Requirements for Linux

Other Platforms: Windows | Mac


Distribution

    Ubuntu 24.04 LTS
    Ubuntu 22.04 LTS
    Ubuntu 20.04 LTS
    Debian 12
    Debian 11
    Red Hat Enterprise Linux 9
    Red Hat Enterprise Linux 8 (minimum 8.6)
    SUSE Linux Enterprise Desktop 15
    SUSE Linux Enterprise Server 15

    Note: Red Hat Enterprise Linux 7 and SUSE Linux Enterprise Server 12 are no longer supported.

Processor

Minimum: Any Intel or AMD x86-64 processor with two or more cores
Recommended: Any Intel or AMD x86-64 processor with four or more cores and AVX2 instruction set support
Note: A future release of MATLAB will require a processor with AVX2 instruction set support

RAM

Minimum: 8 GB
Recommended: 16 GB

Storage

4.1 GB for just MATLAB
4-6 GB for a typical installation
25 GB for an all products installation
An SSD is strongly recommended

Graphics

No specific graphics card is required, but a hardware accelerated graphics card supporting OpenGL 3.3 with 1GB GPU memory is recommended.

Use of vendor-supplied proprietary drivers is strongly recommended.

GPU acceleration using Parallel Computing Toolbox requires a GPU with a specific range of compute capability.  For more information, see GPU Computing Requirements.

 

Running MATLAB and Simulink on Linux

MATLAB and Simulink have been validated on the Linux distributions listed on this page. It is likely that other distributions with Linux kernel version 3.10 or later and glibc version 2.17 or later can successfully run MATLAB and Simulink, but technical support will be limited.

MathWorks follows the vendors’ lifecycle guidance to determine which minor versions of each distribution are validated. Refer the vendors’ websites for more information.

MATLAB and Simulink are validated on standard installations of the distributions listed on this page. “Minimal” or “core” installations of Linux may lack the necessary software packages required to install and run MATLAB and Simulink. Information about which packages are required to run MATLAB is available on MATLAB Answers.

Products Not Available for Linux

  • Data Acquisition Toolbox
  • Model-Based Calibration Toolbox
  • Spreadsheet Link