Answered
User-defined PX4 uORB messages
Custom uORB messages are not supported with Connected I/O currently. You can consider using the Monitor and Tune Simulation inst...

meer dan een jaar ago | 1

| accepted

Answered
UAV Toolbox support package for PX4 Autopilots- Host target simulation
The controller and plant are in lock step simulation by default. What this means is that PX4 controller and the plant wait on e...

meer dan een jaar ago | 0

| accepted

Answered
rror copying generated code into Pixhawk firmware directory. Delete the files in the folder C:\PX4\home\Firmware\src\modules\px4_simulink_app manually and try building again.
As the error messages says, Delete the files in the folder C:\PX4\home\Firmware\src\modules\px4_simulink_app manually and try b...

meer dan een jaar ago | 0

Answered
px4 RAM and flash overflow occur
Yeah for the flash issue, you can consider removing modules. For example, if you are working with a multi-copter, you can consid...

meer dan een jaar ago | 1

| accepted

Answered
Pushing a custom simulink UAV model to px4.
As per your initial question, I understand that you want to deploy the custom controller on a PX4 autopilot for a real flight te...

meer dan een jaar ago | 1

Answered
How to performe simulation SITL with Gazebo using PX4 Autopilots Support from UAV Toolbox? ERROR displayed
Can you verify that the SITL and jMAVSim are launched without any errors on your machine? We have seen Java dependency issues wi...

meer dan een jaar ago | 0

| accepted

Answered
PX4 Supported package - Why Simulink SITL use uORB ground truth?
You should be able to use vehicle_local_position instead of vehicle_local_position_groundtruth as well. I would recommend you tr...

meer dan een jaar ago | 0

Answered
Position Tracking for X-Configuration Quadcopter error in accel and gyro sensors
The error you are getting looks like an issue of connectivity between the plant (jMAVSim) and the PX4 Host Target. The plant sho...

meer dan een jaar ago | 0

Answered
PX4 building on MATLAB on Windows
Pixhawk 3DR flight controller has been discontinued and is no longer commercially available. You can use the mRo Pixhawk instead...

meer dan een jaar ago | 0

Answered
Simulink Pixhawk 1 Build Error: "MW_target_hardware_resources.h": No such file or directory
I would encourage you to use MATLAB R2022b version instead of the below workaround. From MATLAB R2022b PX4 v1.12.3 is supported...

meer dan een jaar ago | 1

| accepted

Answered
Pixhawk 6X / 5X / 6C support by Simulink
Flash overflow issues are seen with Pixhawk 6x during deployment, to resolve this you can consider manually removing unused modu...

meer dan een jaar ago | 2

Answered
Is it possible to use the pixhawk 6x with the "UAV toolbox support package for PX4 autopilot"?
You can choose the 'PX4 Pixhawk Series' as the hardware board. Please ensure that you have completed the Hardware Setup screens ...

meer dan een jaar ago | 0

Answered
PX4 Autopilot in Hardware-in-the-Loop (HITL) Simulation with UAV Dynamics in Simulink
Micro SD card is required for mission upload. Please insert a supported micro SD card to the Pixhawk 4 board. I can see that the...

bijna 2 jaar ago | 0

Answered
Simulink-PX4: Difference between R2022a R2022b (same simulink model does not work in R2022b)
Connected I/O Simulation is not ideally designed for running controller kind of models where the model needs to run at a much hi...

bijna 2 jaar ago | 1

Answered
UAV Toolbox Support Package for PX4 Autopilots - px4_simulink_app module
The modules you are adding to the rc.txt will be started after the board bootup, irrespective of whether you have connected QGro...

bijna 2 jaar ago | 0

Answered
How to upload MATLAB PX4 Autopilot HITL example in real quadrotor UAV?
Deploying for actual flight and HITL is not much different with respect to the Simulink Workflow. For actual flight you might ne...

bijna 2 jaar ago | 0

Answered
UAV Toolbox Support Package for PX4 Autopilots - Pixhawk 4 Flight Experiment
Only controller is replaced from Simulink and MAVLink module is untouched. I am not convinced from this description that the No ...

bijna 2 jaar ago | 0

| accepted

Answered
Understand EKF with SITL/HITL simulation with PX4
The SITL and HITL example you have mentioned is based on replacing the PX4 controller with the controller designed in Simulink. ...

bijna 2 jaar ago | 1

| accepted

Answered
Why do I get XCP internal error: timeout expired?
TELEM1 serial port are fundamentally designed for MAVLink communication and by default MAVLink is enabled in this port. You can ...

bijna 2 jaar ago | 0

Answered
UAV Toolbox Support Package for PX4 Autopilots - Pixhawk 4 Flight preparation
As per my understanding there are no specific steps other than what you did to deploy code for an actual flight. I can provide ...

bijna 2 jaar ago | 1

| accepted

Answered
Deployment of Simulink designed controller to Pixhawk Cube Orange
Even for the HITL Simulation the Simulink based cotroller will be deployed to the Pixhawk/Cube Orange Hardware. There are not mu...

bijna 2 jaar ago | 0

| accepted

Answered
PX4 log strange value, ~1.MAT
This might be because of MS Windows shortening the file name. You can consider giving it a try with shorter model names or manua...

bijna 2 jaar ago | 1

| accepted

Answered
Having Issues Flashing PX4 on Bitcraze Crazyflie 2.1 with Custom rc File
I just went through the Bitcraze Crazyflie 2.1 PX4 documentation. Since you are facing the issue with flashing firmware, I doubt...

ongeveer 2 jaar ago | 0

Answered
UAV Toolbox Support Package for PX4 Autopilots-finish upload firmware
You can refer to the PX4 documentation to understand these status LED's and their meaning.

ongeveer 2 jaar ago | 0

Answered
Unable to run example PX4 in Hardware-in-the-Loop (HITL) Simulation with jMAVSim Simulator
MAVLink is enabled by default over TELEM1 (I am assuming /dev/tty/S1 is TELEM1 in your case) for QGC connectivity. This can caus...

ongeveer 2 jaar ago | 0

| accepted

Answered
Implement simple HITL simulation PX4
Specifying simple setpoints from Simulink is implemented in HITL with Simulink plant example. In the model 'Quadcopter_Control...

ongeveer 2 jaar ago | 1

Answered
Pixhawk 6X / 5X / 6C support by Simulink
Even though some of the Pixhawk standard boards are not among the officially supported boards from PX4 support package, There ar...

ongeveer 2 jaar ago | 0

Answered
A HITL example of UAVtoolbox support package for PX4 autopilots has problem
Ensure that you are running the Simulink plant and visualization model on separate MATLAB instances. Simulink plant running clos...

ongeveer 2 jaar ago | 0

| accepted

Answered
UAV Toolbox support package for PX4: Can't connect Pixhawk 1 on simulink, problem with serial port (this board has two)
Ensure that you followed the documentation to set upload and bootloader COM port step by step. If you unchecked 'Automatically d...

ongeveer 2 jaar ago | 0

Answered
Unable to find the location of PX4 Firmware in host computer. Please perform Hardware setup screens and provide a location for the PX4 Firmware in the setup screens.
After the support package installation, ther Hardware setup step need to be completed before starting to use the Support package...

meer dan 2 jaar ago | 0