Please help me put this into a proper for loop, using increments

1 view (last 30 days)
Hi, I am not very good with loops, so I did it be hand for 4 steps and then put them into code, I need somehow to put rFinal into a for loop so goes through 1000 times. I tried to do that, but without success, the loop are very incorrect, but I'm not sure how to fix them Use for reference, the variable status in order: Initial, Next, changed, New, Final Also NOTE: Pi in this case is the velocity not the variable "pi" (had to use variable pi..)
NOTE: the part I need help with is at the bottom (*** after the space), right BEFORE THE FOR LOOP, the rest is just variables if you want to run it.... if true %% Defining the variables
% the masses
M1=606; % galactic mass unit, = 2.32e7 of solar masses % central mass constants
M2=3690; % disk constants
M3=4615; % halo constants
% the radii and distances
rInitial=8.499; % kpc
rMin=3.51; % kpc
rMax=9.15; % kpc
a2=5.3178; % disk constants % scalar lengths
a3=12; % halo constants % scalar lengths
b1=0.3873; % central mass constants % scalar lengths
b2=0.25; % disk constants % scalar lengths
z=0;
% other remining variables and constants
PiInitial=6.827; % kpc/gtm
dt=1e-3; %time step
%%the order of solving the variables - done by hand
DeltarInitial= PiInitial*dt
rNext= rInitial + DeltarInitial
% solving for rChanged:
% partials of Fi1 % the acceleration components - with r initial
DiyFi1OverRInitial= (M1*rInitial) *dt / ( (b1^2+rInitial^2+z^2)^(3/2) );
% partials of Fi2 % the acceleration components - with r initial
DiyFi2OverRInitial= (M2*rInitial) *dt / ( (rInitial^2+( (a2+sqrt(b2^2+z^2))^2) )^(3/2) );
% partials of Fi3 % the acceleration components - with r initial
DiyFi3OverRInitialTerm1= ( 1.02*M3*rInitial*( (sqrt(rInitial^2+z^2) *dt / a3)^2.04 ) ) / (a3*(rInitial^2+z^2)*( 1+( (sqrt(rInitial^2+z^2) / a3)^1.02 )^2 ));
DiyFi3OverRInitialTerm2= ( M3*rInitial*( ( sqrt(rInitial^2+z^2) / a3 )^2.02 ) ) *dt / ( ( (rInitial^2+z^2)^(3/2) )*( 1+( ( sqrt(rInitial^2+z^2) / a3 )^1.02 ) ) );
DiyFi3OverRInitialTerm3= ( -2.02*M3*rInitial*( ( sqrt(rInitial^2+z^2) / a3 )^1.01 ) ) *dt / ( a3*(rInitial^2+z^2)*( 1+( ( sqrt(rInitial^2+z^2) / a3 )^1.02 ) ) ); % a negative term
DiyFi3OverRInitial= DiyFi3OverRInitialTerm1 + DiyFi3OverRInitialTerm2 + DiyFi3OverRInitialTerm3;
% the acceraration component in the r direction
arInitial= DiyFi1OverRInitial + DiyFi2OverRInitial + DiyFi3OverRInitial
PiNext=PiInitial + arInitial*dt
DeltarNext= PiNext*dt
rChanged= rNext + DeltarNext
% sloving for rNew:
% partials of Fi1 % the acceleration components - with rNext
DiyFi1OverRNext= (M1*rNext) *dt / ( (b1^2+rNext^2+z^2)^(3/2) );
% partials of Fi2 % the acceleration components - with rNext
DiyFi2OverRNext= (M2*rNext) *dt / ( (rNext^2+( (a2+sqrt(b2^2+z^2))^2) )^(3/2) );
% partials of Fi3 % the acceleration components - with rNext
DiyFi3OverRNextTerm1= ( 1.02*M3*rNext*( (sqrt(rNext^2+z^2) *dt / a3)^2.04 ) ) / (a3*(rNext^2+z^2)*( 1+( (sqrt(rNext^2+z^2) / a3)^1.02 )^2 ));
DiyFi3OverRNextTerm2= ( M3*rNext*( ( sqrt(rNext^2+z^2) / a3 )^2.02 ) ) *dt / ( ( (rNext^2+z^2)^(3/2) )*( 1+( ( sqrt(rNext^2+z^2) / a3 )^1.02 ) ) );
DiyFi3OverRNextTerm3= ( -2.02*M3*rNext*( ( sqrt(rNext^2+z^2) / a3 )^1.01 ) ) *dt / ( a3*(rNext^2+z^2)*( 1+( ( sqrt(rNext^2+z^2) / a3 )^1.02 ) ) ); % a negative term
DiyFi3OverRNext= DiyFi3OverRNextTerm1 + DiyFi3OverRNextTerm2 + DiyFi3OverRNextTerm3;
% the acceraration component in the r direction
arNext= DiyFi1OverRNext + DiyFi2OverRNext + DiyFi3OverRNext
PiChanged=PiNext + arNext*dt
DeltarChanged= PiChanged*dt
rNew= rChanged + DeltarChanged
%
%
%
% sloving for rFinal: - THE LOOP PART******************************************
% partials of Fi1 % the acceleration components - with rChanged
DiyFi1OverRChanged= (M1*rChanged) *dt / ( (b1^2+rChanged^2+z^2)^(3/2) );
% partials of Fi2 % the acceleration components - with rNext
DiyFi2OverRChanged= (M2*rChanged) *dt / ( (rChanged^2+( (a2+sqrt(b2^2+z^2))^2) )^(3/2) );
% partials of Fi3 % the acceleration components - with rNext
DiyFi3OverRChangedTerm1= ( 1.02*M3*rChanged*( (sqrt(rChanged^2+z^2) *dt / a3)^2.04 ) ) / (a3*(rChanged^2+z^2)*( 1+( (sqrt(rChanged^2+z^2) / a3)^1.02 )^2 ));
DiyFi3OverRChangedTerm2= ( M3*rChanged*( ( sqrt(rChanged^2+z^2) / a3 )^2.02 ) ) *dt / ( ( (rChanged^2+z^2)^(3/2) )*( 1+( ( sqrt(rChanged^2+z^2) / a3 )^1.02 ) ) );
DiyFi3OverRChangedTerm3= ( -2.02*M3*rChanged*( ( sqrt(rChanged^2+z^2) / a3 )^1.01 ) ) *dt / ( a3*(rChanged^2+z^2)*( 1+( ( sqrt(rChanged^2+z^2) / a3 )^1.02 ) ) ); % a negative term
DiyFi3OverRChanged= DiyFi3OverRChangedTerm1 + DiyFi3OverRChangedTerm2 + DiyFi3OverRChangedTerm3;
% the acceraration component in the r direction
arChanged= DiyFi1OverRChanged + DiyFi2OverRChanged + DiyFi3OverRChanged
PiNew=PiChanged + arChanged*dt
DeltarNew= PiNew*dt
rFinal= rNew + DeltarNew
for i=1:5
arChanged= DiyFi1OverRChanged + DiyFi2OverRChanged + DiyFi3OverRChanged
arChanged= arChanged + 1
for i=1:5
PiNew(i)=PiChanged + arChanged*dt
for k=1:5
DeltarNew(k)= PiNew*dt
for i=1:5
rFinal(i)= rNew + DeltarNew
end
end
end
end
end
end
  6 Comments
sixwwwwww
sixwwwwww on 7 Dec 2013
ok lets put it this way. Which variables you need as a result after nested for loops finish? and are the processing steps same as currently you written in the nested for loops?
Amna
Amna on 7 Dec 2013
Sorry fir the late reply: yep the variables I need in order are the ones in the nested loop, but the method (formula) written right above the loop (starting at **) makes more sense, because the i's and k's within the loop make the formula wrong...

Sign in to comment.

Accepted Answer

sixwwwwww
sixwwwwww on 7 Dec 2013
The part after *************** can be written in loop as follow:
DiyFi1OverRChanged= (M1 * rChanged) * dt / ( (b1^2+rChanged^2+z^2)^(3/2) );
DiyFi2OverRChanged= (M2*rChanged) *dt / ( (rChanged^2+( (a2+sqrt(b2^2+z^2))^2) )^(3/2) );
DiyFi3OverRChangedTerm1= ( 1.02*M3*rChanged*( (sqrt(rChanged^2+z^2) *dt / a3)^2.04 ) ) / (a3*(rChanged^2+z^2)*( 1+( (sqrt(rChanged^2+z^2) / a3)^1.02 )^2 ));
DiyFi3OverRChangedTerm2= ( M3*rChanged*( ( sqrt(rChanged^2+z^2) / a3 )^2.02 ) ) *dt / ( ( (rChanged^2+z^2)^(3/2) )*( 1+( ( sqrt(rChanged^2+z^2) / a3 )^1.02 ) ) );
DiyFi3OverRChangedTerm3= ( -2.02*M3*rChanged*( ( sqrt(rChanged^2+z^2) / a3 )^1.01 ) ) *dt / ( a3*(rChanged^2+z^2)*( 1+( ( sqrt(rChanged^2+z^2) / a3 )^1.02 ) ) ); % a negative term
DiyFi3OverRChanged= DiyFi3OverRChangedTerm1 + DiyFi3OverRChangedTerm2 + DiyFi3OverRChangedTerm3;
arChanged= DiyFi1OverRChanged + DiyFi2OverRChanged + DiyFi3OverRChanged;
PiNew(1) = PiChanged + arChanged * dt;
DeltarNew(1) = PiNew(1) * dt;
rFinal(1) = rNew + DeltarNew(1);
for i=1:5
arChanged= arChanged + 1;
PiNew(i + 1)= PiChanged + arChanged * dt;
DeltarNew(i + 1)= PiNew(i + 1) * dt;
rFinal(i + 1)= rNew + DeltarNew(i + 1);
end
It it what you need?
  6 Comments
Amna
Amna on 8 Dec 2013
First of all, thankyou sooo much for all your effort!! It's mostly correct, :)) I'm just trying to find the error which is keeping rFinal the same value, tried for 1000 loops but the rFinal remains exactly the same. rFinal should increase by a few. Trying to figure it out right now, will let you know when I get it ;)). Thank again!!
sixwwwwww
sixwwwwww on 8 Dec 2013
Edited: sixwwwwww on 8 Dec 2013
you are welcome.
You can check the values on which rFinal depends. if those values are changing then rFinal must also change accordingly

Sign in to comment.

More Answers (0)

Categories

Find more on Loops and Conditional Statements in Help Center and File Exchange

Tags

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!