Get Started with Wireless Testbench
Wireless Testbench™ provides reference applications that are ready to run on off-the-shelf software-defined radio (SDR) hardware such as USRP™ using over-the-air signals for high-speed data transmit, capture, and spectrum monitoring.
Using MATLAB® command line instructions, you can connect to supported SDR hardware, configure and execute prebuilt FPGA bitstreams as reference applications, and perform real-time measurements.
Using the configurable preamble detector, you can define a trigger to capture only the signal of interest for offline analysis in MATLAB.
- Capture from Frequency Band
Capture IQ data using single radio antenna and plot the frequency spectrum of the captured data.
- Triggered Capture Using Preamble Detection
Capture data from the air upon detecting a preamble sequence.
- Transmit Waveform
Transmit generated waveform using single radio antenna.
- Loopback Transmit and Capture
Transmit and capture generated waveform using single radio.