Obtain radio information
Get ADALM-PLUTO Radio Information
info object function to get information from the connected ADALM-PLUTO radio. The actual values used in the radio are shown by
info and can be vary slightly from the values specified in the object.
rx = sdrrx('Pluto'); info(rx)
## Establishing connection to hardware. This process can take several seconds.
ans = struct with fields: Status: 'Full information' CenterFrequency: 2.4000e+09 BasebandSampleRate: 999999 SerialNum: '104473222a870010050020009db5d52277' GainControlMode: 'AGC Slow Attack' RadioFirmwareVersion: "0.30" ExpectedFirmwareVersion: "0.30" HardwareVersion: "B0"
sdr — Software defined radio
SDR System object
Software defined radio, connected to the host computer and associated with an SDR System object.
txPluto = sdrtx('Pluto') creates a PlutoSDR
transmitter System object.
RadioSettings — Synchronized radio settings information
Synchronized radio settings information between an SDR System object and the associated radio hardware, returned as a structure array.
sdr has settings information, the returned radio
information varies depending on the type of radio hardware.
sdr has no settings information or it is not
associated with a radio attached to the host, the structure returned is
empty or with the
Status field set to
connection with device'.
BasebandSampleRateproperties, the actual radio setting and your specified setting can have a small mismatch. To confirm that the actual radio setting is close enough to your specified setting, call the
infoobject function on the radio object.
FrequencyCorrectionproperty changes the actual radio setting for
Introduced in R2017a