Main Content

demdataui

(Removed) UI for selecting digital elevation data

The demdataui function has been removed. Use the readgeoraster function instead.

Syntax

Description

demdataui is a graphical user interface to extract digital elevation map data from a number of external data files. You can extract data to MAT-files or the base workspace as regular data grids with referencing vectors.

The demdataui panel lets you read data from a variety of high-resolution digital elevation maps (DEMs). These DEMs range in resolution from about 10 kilometers to 100 meters or less. The data files are available over the Internet at no cost, or (in some cases) on CD-ROMs for varying fees. demdataui reads ETOPO5, TerrainBase, GTOPO30, GLOBE, satellite bathymetry from Smith and Sandwell, and DTED data. demdataui looks for these geospatial data files on the MATLAB® path and, for some operating systems, on CD-ROM disks.

Note

When it opens, demdataui scans your Mapping Toolbox™ path for candidate data files. On PCs, it also checks the root directories of CD-ROMs and other drives, including mapped network drives. This can cause a delay before the GUI appears.

You use the list to select the source of data and the map to select the region of interest. When you click the Get button, data is extracted and displayed on the map. Use the Save button to save the data in a MAT-file or to the base workspace for later display. The Close button closes the window.

Controls

UI for selecting digital elevation data

The Map

The map controls the geographic extent of the data to be extracted. demdataui extracts data for areas currently visible on the map. Use the mouse to zoom in or out to the area of interest. See zoom for more on zooming.

Some data sources divide the world up into tiles. When extracting, data is concatenated across all visible tiles. The map shows the tiles in light yellow with light gray edges. When data resolution is high, extracting data for large area can take much time and memory. An approximate count of the number of points is shown above the map. Use the Samplefactor slider to reduce the amount of data.

The List

The list controls the source of data to be extracted. Click a name to see the geographic coverage in light yellow. The sources list shows the data sources found when demdataui started.

demdataui searches for data files on the MATLAB path. On some computers, demdataui also checks for data files on the root level of letter drives. demdataui looks for the following data:

  • etopo5: The files new_etopo5.bil or etopo5.northern.bat and etopo5.southern.bat.

  • tbase: The file tbase.bin.

  • satbath: The file topo_6.2.img.

  • gtopo30: A folder that contains subfolders with the data files. For example, demdataui would detect GTOPO30 data if a folder on the path contained the folders E060S10 and E100S10, each of which holds the uncompressed data files.

  • globedem: A folder that contains data files and in the subfolder /esri/hdr and the *.hdr header files.

  • dted: A folder that has a subfolder named DTED. The contents of the DTED folder are more subfolders organized by longitude and, below that, the DTED data files for each latitude tile.

The Samplefactor Slider

The Sample Factor slider allows you to reduce the density of the data. A sample factor of 2 returns every second point. The current sample factor is shown on the slider.

The Get Button

The Get button reads the currently selected data and displays it on the map. Press the standard interrupt key combination for your platform to interrupt the process.

The Clear Button

The Clear button removes any previously read data from the map.

The Save Button

The Save button saves the currently displayed data to a MAT-file or the base workspace. If you choose to save to a file, you will be prompted for a file name and location. If you choose to save to the base workspace, you can choose the variable name under which the data will be stored. The demdataui function returns one or more matrices as an array of display structures, having one element for each separate get you requested (assuming you did not subsequently Clear).

Data are returned as Mapping Toolbox Version 1 display structures. For information about display structure format, see Version 1 Display Structures in the reference page for displaym.

Use load and displaym to redisplay the data from a file on an axesm-based map. To display the data in the base workspace, use displaym. To gain access to the data matrices, subscript into the structure (for example, datagrid = demdata(1).map; refvec = demdata(1).maplegend. Use worldmap to create easy displays of the elevation data (for example, worldmap(datagrid,refvec). Use meshm to add regular data grids to existing displays, or surfm or a similar function for geolocated data grids (for example, meshm(datagrid,refvec) or surfm(latgrat,longrat,z).

The Close Button

The Close button closes the demdataui panel.

Examples

collapse all

Read from data sets that demdataui has located. You will not necessarily have all the DEM data sets shown in this example. For information about finding data sets over the Internet, see Find Geospatial Raster Data.

Open the demdataui UI. It scans the path for data before it is displayed.

demdataui

The Source list shows the data sets that were found. Here, the source is selected to present all DTED files available to a user.

UI for selecting digital elevation data

Click GTOPO30. In this example, there are available GTOPO30 tiles. The coverage of each data set is indicated by a yellow tint on the map with gray borders around each tile of data.

UI with world map of available GTOPO30 tiles

Use the map in the UI to specify the location and density of data to extract. To interactively set a region of interest, click in the map to zoom by a factor of two centered on the cursor, or click and drag across the map to define a rectangular region. The size of the matrix of the area currently displayed is printed above the map. To reduce the amount of data, you can continue to zoom in, or you can raise the Samplefactor slider. A sample factor of 1 reads every point, 2 reads every other point, 3 reads every third point, etc. The matrix size is updated when you move the Samplefactor slider.

Here is the UI panel after selecting GTOPO30 data and zooming in on the Indian subcontinent.

UI with map centered on Indian subcontinent

To see the terrain you have windowed at the sample factor you specified, click the Get button. This causes the GUI map pane to repaint to display the terrain grid with the demcmap colormap. In this example, the data grid contains 580-by-568 data values, as shown below.

UI with elevation map centered on Indian subcontinent

If you are not satisfied with the result, click the Clear button to remove all data previously read in via Get and make new selections. You might need to close and reopen demdatui in order to select a new region of interest.

When you are ready to import DEM data to the workspace or save it as a MAT-file, click the Save button.

Tips

  • If demdataui does not recognize data you think it should find, check your path and click Help to read about how files are identified.

  • You can add the data grids to an axesm-based map by using the geoshow function.

  • Updating the data returned by demdataui to geographic data structures (geostructs) using the updategeostruct function is not supported because they are of type surface.

Version History

Introduced before R2006a

expand all

R2024b: Removed

The demdataui function has been removed. Use the readgeoraster function instead.