Specify whether to use an Embedded Coder support package
EmbeddedCoderSupportPackage specifies if
you want to use an Embedded Coder® support package for your reference
design. Use this parameter if you are targeting a standalone FPGA
board or an SoC device such as the Xilinx® Zynq®-7000 platform.
If you are targeting a standalone FPGA board, the reference designs do not require an
Embedded Coder support package. If
hRD is the reference design object
that you construct with the
hdlcoder.ReferenceDesign class, then use this
hRD.EmbeddedCoderSupportPackage = ... hdlcoder.EmbeddedCoderSupportPackage.None;
When you are not using the support package, HDL Coder™ displays the Generate Software Interface task in the
HDL Workflow Advisor, but has the Generate Simulink software interface
model check box greyed out. If you have HDL Verifier™ installed, on the Set Target Reference Design task,
set Insert JTAG MATLAB as AXI Master (HDL Verifier Required) to
on. You can then generate a software interface script in
the Generate Software Interface task to rapidly prototype and test
the HDL IP core functionality by using the MATLAB AXI Master. See Generate Software Interface Script to Probe and Rapidly Prototype HDL IP Core.
If you are targeting SoC devices, use this syntax depending on whether you are using an Intel® SoC or a Xilinx Zynq platform.
hRD.EmbeddedCoderSupportPackage = ... hdlcoder.EmbeddedCoderSupportPackage.Zynq; hRD.EmbeddedCoderSupportPackage = ... hdlcoder.EmbeddedCoderSupportPackage.AlteraSoC;