Fault Inport

Capture inlet signal for fault behaviors

Since R2023b

Libraries:
Simulink Fault Analyzer / Fault Port Blocks

Description

Fault Inport blocks link signals from an external model to the model of a fault behavior. You can use these blocks to capture signal data from Simulink^® and System Composer™ models.

Use these blocks only in Fault Subsystem blocks. Each Fault Subsystem block can contain only one Fault Inport block.

Examples

Define Fault Behaviors

Add faults with custom behaviors and modify the fault trigger.

Open Live Script

Define Trigger Properties

Adjust when and how faults are injected by defining triggers.

Open Live Script

Run Fault Simulations and View Results

Generate fault simulation results with interactive and programmatic commands.

Open Live Script

Ports

Output

expand all

Port_1 — Input from model
scalar | vector | matrix

Input from model to behavior, specified as a scalar, vector, or matrix. Connect to this block to represent the intercepted signal from another model.

Block Characteristics

Data Types	`Boolean` \| `bus` \| `double` \| `enumerated` \| `fixed point` \| `half` \| `integer` \| `single` \| `string`
Direct Feedthrough	`no`
Multidimensional Signals	`yes`
Variable-Size Signals	`no`
Zero-Crossing Detection	`no`

Extended Capabilities

C/C++ Code Generation
Generate C and C++ code using Simulink® Coder™.

Version History

Introduced in R2023b

Fault Inport

Description