Configure Virtual Vehicle Scenario and Test
Before completing this step, see Configure Virtual Vehicle Data.
Next, use the Scenario and Test options to configure virtual vehicle test scenario. The available options depend on the virtual vehicle Powertrain architecture and Model template parameter settings.
If you set Scenario to
Cycle, you can use:
Drive cycles from predefined sources. By default, the block includes the
FTP–75drive cycle. To install additional drive cycles from a support package, see Install Drive Cycle Data. The support package has drive cycles that include the gear shift schedules, for example,
Workspace variables that define your own drive cycles.
xlsx, or .
Wide open throttle (WOT) parameters, including initial and nominal reference speed, deceleration start time, and final reference speed.
For this example, run the virtual vehicle through the
drive cycle. On the Scenario and Test tab, set:
Drive cycle to
Click Add to Test Plans.
After completing this step, see Configure Virtual Vehicle Data Logging.