Analyze Dynamic Response and Flying Qualities of Aerospace Vehicles

Aerospace Blockset™ provides flight control analysis tools that you can use to analyze the dynamic response and flying qualities of aerospace vehicles.

  • Flight Control Analysis Live Scripts — MATLAB® live scripts demonstrate dynamic response and flying quality analysis of Sky Hogg and de Havilland Beaver airframes.

  • Modify Flight Control Analysis Templates — You can use templates to analyze the flying qualities of 3 degree-of-freedom and 6 degree-of-freedom airframe models. When you are comfortable running the analysis on the default airframes, you can replace them with your own airframe and analyze it.

Note

Analyzing dynamic response and flying qualities of airframes requires a Simulink® Control Design™ license.

Flight Control Analysis Live Scripts

Each flight control analysis template has an associated MATLAB live script that guides you through a flying quality analysis workflow for the default airframe. You can interact with the script and explore the analysis workflow.

For more information on running live scripts, see Run Sections in Live Scripts (MATLAB).

  1. Open one of the templates, for example:

    asbFlightControlAnalysis('6DOF')

    Navigate to the Getting Started section and click the first link.

    Alternatively, in the Command Window, type:

    open('DehavillandBeaverFlyingQualityAnalysis')
  2. The script describes how to use eigenvalue analysis to determine the longitudinal flying qualities (long-period phugoid mode and short-period mode) and lateral-directional flying qualities (Dutch roll mode, roll mode, and spiral mode) for an aircraft modeled in Simulink.

    As you run the script, when applicable, the results of the runs display inline.

Modify Flight Analysis Templates

Aerospace Blockset provides these templates:

  • flightControl6DOFAirframeTemplate — This template uses a six degree-of-freedom airframe configured for linearization and quality analysis. For initialization, the template uses the de Havilland Beaver airframe parameters.

  • flightControl3DOFAirframeTemplate — This template uses a 3 degree-of-freedom longitudinal airframe configured for linearization and quality analysis. For initialization, the template uses Sky Hogg airframe parameters.

When you are comfortable navigating the flight control analysis templates with the default airframes, consider customizing the templates for your own airframe model.

Flight Control Analysis Templates

To familiarize yourself with Aerospace Blockset flight control analysis templates:

  1. Open one of the templates. For example, to start a 3DOF template:

    asbFlightControlAnalysis('3DOF')

    To open a 6DOF template:

    asbFlightControlAnalysis('6DOF')

    The flight control analysis model opens.

  2. The Analysis Workflow section contains a clickable guided workflow to compute longitudinal and lateral-directional flying qualities and compare their values against MIL-F-8785C requirements. Each step creates the necessary variables for the following step. To perform the flying quality analysis, sequentially click the links in the steps.

    1. Create an operating point specification object in the base workspace for the airframe model using the Linear Analysis Trim Tool. Alternatively, load the default object provided in step 2.

    2. To trim the airframe, click Trim the airframe in step 3. This action calls the trimAirframe function.

    3. To linearize the airframe around a trimmed operating point, click Linearize the airframe in step 4. This action calls the linearizeAirframe function.

    4. To compute the longitudinal flying qualities, click Compute longitudinal handling qualities. This action calls the computeLongitudinalFlyingQualities function.

    5. To compute the lateral-directional handling qualities, click Compute lateral-directional handling qualities in step 6. This action calls the computeLateralDirectionalFlyingQualities function.

Modify Flight Control Analysis Templates

When you are comfortable using the 3DOF and/or 6DOF flight control analysis templates to trim, linearize, and compute the longitudinal and lateral-directional handling qualities for the default airframes, consider customizing the templates to include your own airframe.

  1. Open a 3DOF or 6DOF template and change the airframe to one of your own. For example, to change the template airframe to an external model:

    asbFlightControlAnalysis('6DOF', 'sixDOFAirframeExample','DehavillandBeaver6DOFAirframe')

    This command replaces the de Havilland Beaver subsystem with the DehavillandBeaver6DOFAirframe model and includes it as a referenced model.

    Alternatively, in the corresponding canvas, manually replace the default model airframe in the blue area with your own airframe.

  2. On the canvas, align the inputs and outputs of the airframe using the Input Mapping and Output Mapping subsystems.

  3. Create a new operating point specification object. In the Analysis Workflow section, go to step 2 and click the Launch link to start the Linear Analysis Trim Tool.

  4. To save your opCond.OperatingSpec object to the base workspace, click the Export button in the dialog window.

  5. To trim, linearize, and compute the longitudinal and lateral-directional handling qualities for the airframe model, click the links in workflow steps 3, 4, 5, and 6.

Explore Flight Control Analysis Functions

The flight control analysis live scripts and template workflows use these functions:

  • asbFlightControlAnalysis

  • trimAirframe

  • linearizeAirframe

  • computeLongitudinalFlyingQualities

  • computeLateralDirectionalFlyingQualities

To customize your own scripts to trim airframes around operating points, linearize airframes, and calculate longitudinal and lateral-directional handling qualities, you can use these functions in a workflow as follows:

  1. Create a flight control analysis template using the asbFlightControlAnalysis function.

  2. Trim the airframe model around an operating point using the trimAirframe function.

    This step creates a trimmed operating point, required by the linearizeAirframe function.

  3. Linearize the airframe model around the trimmed operating point using the linearizeAirframe function.

    This step creates a state space model that describes the linearized dynamics of the airframe model at a trimmed operating point.

  4. Compute the flying qualities for the airframe, including short- and long-period (phugoid) mode characteristics of the specified state space model, using computeLongitudinalFlyingQualities, and lateral-directional (Dutch roll, roll, and spiral) mode characteristics, using computeLateralDirectionalFlyingQualities.

For example:

asbFlightControlAnalysis('6DOF', 'DehavillandBeaverAnalysisModel');
opSpecDefault = DehavillandBeaver6DOFOpSpec('DehavillandBeaverAnalysisModel');
opTrim = trimAirframe('DehavillandBeaverAnalysisModel', opSpecDefault);
linSys = linearizeAirframe('DehavillandBeaverAnalysisModel', opTrim);
lonFlyingQual = computeLongitudinalFlyingQualities('DehavillandBeaverAnalysisModel', linSys)
latFlyingQual = computeLateralDirectionalFlyingQualities('DehavillandBeaverAnalysisModel', linSys)

See Also

| | | | |