nrWavegenPUCCH2Config

PUCCH format 2 configuration parameters for 5G waveform generation

Since R2021b

Description

The nrWavegenPUCCH2Config object sets physical uplink control channel (PUCCH) configuration parameters for format 2, as defined in TS 38.211 Sections 6.3.2.1, 6.3.2.5, and 6.4.1.3.2 [1]. Use this object to set the PUCCH property of the nrULCarrierConfig object when you configure 5G uplink waveform generation.

The default nrWavegenPUCCH2Config object allocates a PUCCH format 2 in the first resource block (RB) of the bandwidth part (BWP) and the last OFDM symbol in the slot of 14 OFDM symbols. PUCCH format 2 transmission is in all slots and carries 10 uplink control information (UCI) bits.

For operation with shared spectrum channel access for frequency range 1 (FR1), set the Interlacing property to true, then use the RBSetIndex and InterlaceIndex object properties to specify the allocated frequency resources. In addition, you can use the SpreadingFactor and OCCI properties to specify single-interlace configurations. (since R2023b)

Creation

Syntax

pucch = nrWavegenPUCCH2Config

pucch = nrWavegenPUCCH2Config(Name=Value)

Description

pucch = nrWavegenPUCCH2Config creates a default PUCCH format 2 configuration object for 5G waveform generation.

pucch = nrWavegenPUCCH2Config(Name=Value) sets properties using one or more name-value arguments. For example, Period=20 specifies 20 slots for the PUCCH allocation period.

Properties

Enable — Option to enable PUCCH configuration

true or 1 (default) | false or 0

Option to enable this PUCCH configuration in 5G waveform generation, specified as one of these numeric or logical values.

• 1 (true) — Enable this PUCCH.

• 0 (false) — Disable this PUCCH.

Data Types: double | logical

Label — Name of PUCCH format 2 configuration

'PUCCH format 2' (default) | character vector | string scalar

Name of this PUCCH format 2 configuration, specified as a character vector or string scalar. Use this property to set a description to the configuration.

Data Types: char | string

Power — Power scaling of PUCCH in dB

0 (default) | real-valued scalar | real-valued vector (since R2024b)

Power scaling of the PUCCH in dB, specified as a real-valued scalar or real-valued vector of length equal to the number of allocated transmissions in a period configured by the SlotAllocation property. Use this property to scale the power of the configured PUCCH in the generated 5G waveform.

Data Types: double

BandwidthPartID — ID of BWP

1 (default) | nonnegative integer

ID of the BWP containing the configured PUCCH, specified as a nonnegative integer. Use this property to associate this PUCCH configuration with one of the BWP configurations specified by the BandwidthParts property of the nrULCarrierConfig object.

Data Types: double

SymbolAllocation — OFDM symbol allocation of PUCCH

[13 1] (default) | [] | two-element vector of nonnegative integers

OFDM symbol allocation of the PUCCH within a slot, specified as [] or a two-element vector of nonnegative integers. The first element of this property represents the start of symbol allocation. The second element represents the number of consecutively allocated OFDM symbols and must equal 1 or 2. To indicate that no OFDM symbols are allocated for the PUCCH, use [] or specify the second element of the vector as 0.

Data Types: double

SlotAllocation — Slot allocation in PUCCH period

[0:9] (default) | nonnegative integer | row vector of nonnegative integers

Slot allocation in a PUCCH period, specified as a nonnegative integer or a row vector of nonnegative integers. This property specifies the slot positions of the PUCCH by using 0-based indexing and values that are less than the value of the Period property. The object ignores slot allocation values that are greater than the period.

Data Types: double

Period — PUCCH allocation period in slots

10 (default) | nonnegative integer | []

PUCCH allocation period in slots, specified as a nonnegative integer or []. An empty period indicates no repetition.

Data Types: double

PRBSet — PRB allocation

0 (default) | vector of integers from 0 to 274 | []

Physical resource block (PRB) allocation of the PUCCH within the BWP, specified as a vector of integers from 0 to 274 or []. To indicate that no resource blocks are allocated for the PUCCH, use [].

Dependencies

To enable this property, set the Interlacing property to 0 (false).

Data Types: double

FrequencyHopping — Frequency hopping configuration for PUCCH

'neither' (default) | 'intraSlot' | 'interSlot'

Frequency hopping configuration for the PUCCH, specified as one of these values.

• 'neither' — Indicates no frequency hopping

• 'intraSlot' — Enables intraslot frequency hopping

• 'interSlot' — Enables interslot frequency hopping

When you enable interslot frequency hopping, the slot number determines the starting resource block for the allocated OFDM symbols. For even-numbered slots, the resource block starts from the minimum resource block allocated in the PRBSet property. For odd-numbered slots, the resource block starts from the resource block provided in the SecondHopStartPRB property.

Dependencies

To enable this property, set the Interlacing property to 0 (false).

Data Types: char | string

SecondHopStartPRB — Starting PRB index of second hop relative to BWP

1 (default) | integer from 0 to 274

Starting PRB index of the second hop relative to the BWP, specified as an integer from 0 to 274.

Dependencies

To enable this property, set the FrequencyHopping property to 'intraSlot' or 'interSlot' and set the Interlacing property to 0 (false).

Data Types: double

Interlacing — Interlaced resource allocation

0 or false (default) | 1 or true

Since R2023b

Interlaced resource allocation, specified as one of these values.

• 0 (false) — Disable interlaced resource allocation.

• 1 (true) — Enable interlaced resource allocation. Use the RBSetIndex and InterlaceIndex properties to configure the frequency resource allocation.

This property implements the useInterlacePUCCH-PUSCH higher-layer parameter.

Data Types: double | logical

RBSetIndex — Indices of RB sets between intracell guard bands

0 (default) | vector of nonnegative integers

Since R2023b

Indices of RB sets between intracell guard bands (0-based), specified as a vector of nonnegative integers. Use this property to specify the indices of the RB sets in an interlaced resource allocation.

Dependencies

To enable this property, set the Interlacing property to 1 (true).

Data Types: double

InterlaceIndex — Interlace indices

0 (default) | vector of nonnegative integers

Since R2023b

Interlace indices in the interlaced resource allocation, specified as a vector of nonnegative integers with up to M elements. The vector element must be in the range [0, M – 1). M = 10 for 15 kHz subcarrier spacing and M = 5 for 30 kHz subcarrier spacing.

Dependencies

To enable this property, set the Interlacing property to 1 (true).

Data Types: double

SpreadingFactor — Spreading factor

2 (default) | 4

Spreading factor, specified as 2 or 4.

Dependencies

To enable this property, set the InterlaceIndex property to a scalar.

Data Types: double

OCCI — Orthogonal cover code index

0 (default) | integer from 0 to 3

Orthogonal cover code index (OCCI), specified as an integer from 0 to 3. The OCCI value must be less than the SpreadingFactor property.

Dependencies

To enable this property, set the InterlaceIndex property to a scalar.

Data Types: double

NID — PUCCH scrambling identity

[] (default) | integer from 0 to 1023

PUCCH scrambling identity, specified as [] or an integer from 0 to 1023.

• If the higher-layer parameter dataScramblingIdentityPUSCH is configured, this property must be an integer from 0 to 1023.

• If the higher-layer parameter dataScramblingIdentityPUSCH is not configured, this property must be equal to the physical layer cell identity and be an integer from 0 to 1007.

When you specify this property as [], the object sets the PUCCH scrambling identity to the physical layer cell identity specified by the NCellID property of the nrULCarrierConfig object.

Data Types: double

RNTI — Radio network temporary identifier

1 (default) | integer from 0 to 65,535

Radio network temporary identifier of the user equipment (UE), specified as an integer from 0 to 65,535.

Data Types: double

Coding — PUCCH encoding of UCI

true or 1 (default) | false or 0

PUCCH encoding of UCI, specified as one of these numeric or logical values.

• 1 (true) — Enable UCI encoding.

• 0 (false) — Disable UCI encoding.

Data Types: double | logical

NumUCIBits — Number of UCI bits

10 (default) | integer from 0 to 1706

Number of UCI bits, specified as an integer from 0 to 1706. For no UCI transmission, set this property to 0.

Data Types: double

DataSourceUCI — Source of UCI contents

'PN9-ITU' (default) | 'PN9' | 'PN11' | 'PN15' | 'PN23' | two-element cell array | binary-valued vector

Source of UCI contents, specified as one of these options.

• 'PN9-ITU', 'PN9', 'PN11', 'PN15', or 'PN23'

• Two-element cell array consisting of one of the character vectors from the previous list and a random numeric seed (for example, {'PN9',7})

• Binary-valued vector

If you do not specify a random seed, the object initializes all shift registers with an active state.

Dependencies

To enable this property, set the NumUCIBits property to a positive integer.

Data Types: double | cell | string | char

NID0 — DM-RS scrambling identity

[] (default) | integer from 0 to 65,535

Demodulation reference signal (DM-RS) scrambling identity, specified as [] or an integer from 0 to 65,535.

• If the higher-layer parameter scramblingID0 is configured, this property must be an integer from 0 to 65,535.

• If the higher-layer parameter scramblingID0 is not configured, this property must be equal to the physical layer cell identity and be an integer from 0 to 1007.

When you specify this property as [], the object sets the DM-RS scrambling identity to the physical layer cell identity specified by the NCellID property of the nrULCarrierConfig object.

Data Types: double

DMRSPower — Power scaling of PUCCH DM-RS in dB

0 (default) | real-valued scalar

Power scaling of the PUCCH DM-RS in dB, specified as a real-valued scalar. Use this property to scale the power of the PUCCH DM-RS in the generated 5G waveform. This scaling is additional to the PUCCH-wide power scaling specified by the Power property.

Data Types: double

Examples

Configure Multiple PUCCH for 5G Uplink Waveform Generation

Create two SCS carrier configuration objects with mixed numerologies.

carrier1 = nrSCSCarrierConfig(SubcarrierSpacing=15);
carrier2 = nrSCSCarrierConfig(SubcarrierSpacing=30);

Create two BWP configuration objects, one for each of the SCS carriers.

bwp1 = nrWavegenBWPConfig(BandwidthPartID=1,SubcarrierSpacing=15);
bwp2 = nrWavegenBWPConfig(BandwidthPartID=2,SubcarrierSpacing=30);

Create a PUCCH format 0 configuration object for the first SCS carrier and a PUCCH format 1 configuration object for the second SCS carrier. For configuring PUCCH format 2, 3, or 4, use the nrWavegenPUCCH2Config, nrWavegenPUCCH3Config, or nrWavegenPUCCH4Config configuration objects, respectively. By default, each PUCCH configuration object enables the PUCCH on their respective carriers.

pucch1 = nrWavegenPUCCH0Config( ...
    BandwidthPartID=1,SlotAllocation=0:9,PRBSet=2,DataSourceUCI='PN9');
pucch2 = nrWavegenPUCCH1Config( ...
    BandwidthPartID=2,SlotAllocation=0:9,PRBSet=2,DataSourceUCI='PN9');

Create a PUSCH configuration object such that the PUSCH does not overlap with the previously configured PUCCH in the generated waveform.

pusch = nrWavegenPUSCHConfig(BandwidthPartID=1, ...
    SymbolAllocation=[0,8],PRBSet=10:51);

Create an uplink carrier configuration object for 5G waveform generation, specifying the previously defined configurations. You can disable the PUCCH in either SCS carrier by setting the corresponding cfg.PUCCH{1}.Enable or cfg.PUCCH{2}.Enable properties, respectively, to false.

cfg = nrULCarrierConfig( ...
    SCSCarriers={carrier1,carrier2}, ...
    BandwidthParts={bwp1,bwp2}, ...
    PUSCH={pusch}, ...
    PUCCH={pucch1,pucch2});

References

[1] 3GPP TS 38.211. “NR; Physical channels and modulation.” 3rd Generation Partnership Project; Technical Specification Group Radio Access Network.

Extended Capabilities

C/C++ Code Generation
Generate C and C++ code using MATLAB® Coder™.

Version History

Introduced in R2021b

R2024b: Configure separate power scaling for each PUCCH in a period

Configure separate power scaling for each PUCCH in a period by setting the Power property to a vector of length equal to the number of allocated transmissions in a period.

R2023b: Support for release 16 interlacing for operation in unlicensed spectrum (NR-U)

Use the Interlacing, RBSetIndex, InterlaceIndex, SpreadingFactor, and OCCI properties to configure interlaced PUCCH transmissions. Setting the Interlacing property to true disables the PRBSet and FrequencyHopping properties.