From the series: Developing Wind Power Systems Using MATLAB and Simulink
Steve Miller, MathWorks
The number and complexity of control systems in wind turbines is expanding rapidly, and their design can be the difference between an immensely profitable system and a dormant or damaged system. Designing a robust control system requires an accurate model of the plant, and tools that enable rapid iteration to find the best design, not simply the first design that works. The control system must be as optimized as possible, while meeting multiple (and sometimes conflicting) system requirements. Pitch and yaw controllers must also interact with supervisory logic controllers in order to operate and protect the turbine under a wide range of operating conditions.
The model of a complete wind turbine (including mechanical, electrical and hydraulic systems) will be used to show:
• How to easily apply linear control theory to rapidly design controllers for nonlinear systems, and to verify their performance on the nonlinear system
• How to use optimization algorithms to optimize system performance with respect to multiple design requirements
• How to define supervisory logic using state machines
• How to integrate and test all of these models in a single environment to test for integration issues and test overall system performance
These points will be illustrated with demonstrations using the model and the simulation software. Experience with MATLAB and Simulink is helpful, but not required to learn from this webinar.
You can download the model used in this webinar from MATLAB Central.
Recorded: 19 May 2009
Model-Based Design of a Wind Turbine Developing wind turbines requires a smooth, continuous development process in which modeling and simulation plays a large role. From the earliest design phase to the automatic generation of production code, engineers need the ability to test new idea
Determining Mechanical Loads for Wind Turbines Determining the mechanical loads a wind turbine experiences is a complex process that requires more than just a model of the mechanical system. To accurately predict maximum loads, deflections, and oscillations, the entire system must be modeled in o
Designing Pitch and Yaw Actuators for Wind Turbines Engineers designing yaw and pitch actuators for wind turbines need to take into account many of the other components in the overall system to produce an optimized design. Selecting a technology requires doing tradeoff studies in early stages to deter
Designing Control Systems For Wind Turbines The number and complexity of control systems in wind turbines is expanding rapidly, and their design can be the difference between an immensely profitable system and a dormant or damaged system. Designing a robust control system requires an accurate