How to control the speed of the synchronus motor in simscape?
In the attached image there is no control, it is open loop. For learning more about speed control of synchronous machines check ...

8 maanden ago | 0

Variable Speed Driver for Induction Motors - Constant V/Hz Control
Simscape Electrical provides a block implementing Scalar Control: https://www.mathworks.com/help/sps/ref/inductionmachinescalar...

8 maanden ago | 0

How to implement a V/Hz control transfer function in Simulink?
Simscape Electrical provides a block implementing Scalar Control: https://www.mathworks.com/help/sps/ref/inductionmachinescalar...

8 maanden ago | 0

Making a 3 phase semi-controlled converter using Simscape Electrical
In Simscape Electrical it is possible to use the Conveter (Three-Phase) block and set the 'Switching device' parameter to GTO or...

8 maanden ago | 0

is it possible to build a controllable load ?
In Simscape Electrical it is possible to use a dynamic load (single-phase or threee-phase). https://www.mathworks.com/help/sps...

8 maanden ago | 0

Where can we get description about HVDC control blocks?
If these blocks are part of a MathWorks product (e.g., Simscape Electrical) then you can click on help in the block mask to open...

8 maanden ago | 0

Having trouble charging battery using controlled voltage source
I would use a Controlled Current Source instead to charge the battery. See this simple Simscape Electrical example showing how t...

8 maanden ago | 0

Converting a sinusoidal signal into a trapezoidal one?
A saturation block can be used to saturate to sine wave so the output will look like a trapezoidal signal. Let’s say we have a s...

8 maanden ago | 1

| accepted

DC-DC Buck-Boost Converter Closed Loop PWM control
The proportional control employed is not working properly. The controller is very basic, multiplying the error with a constant b...

8 maanden ago | 0

Undefined function 'cos' for input arguments of type 'char'.
inputdlg returns a cell array of character vectors containing one input per edit field, starting from the top of the dialog box....

8 maanden ago | 0

| accepted

Why does SIMSCAPE have different values for the speed and the revolutions in the output, although they have to be the same? Is it maybe due to false parameters of the PI-regulator?
There are two issues with this model: i) instead of using electrical angle in the dq-abc block is using the mechanical angle, an...

8 maanden ago | 0

Dynamically simulate PMSM motor
The best starting point for understanding how the FEM-Parametrized PMSM block can be configured is the documentation page: http...

8 maanden ago | 1

Why PMSM model spins with SVPWM block?
In Simscape Electrical (or other Simulink toolboxes), the models for Permanent Magnet Synchronous Motors (PMSMs) can indeed star...

8 maanden ago | 0

How can I use the Battery Equivalent Circuit module and output its SOC？
It is possible to use a Probe block to output internal variables such as state of charge from the Battery Equivalent Circuit blo...

8 maanden ago | 0

| accepted

How to measure the frequency of a 3 phase generator in simscape electrical
You can use a Sinusoidal Measurement (PLL, Three-Phase) block in Simscape Electrical. The Sinusoidal Measurement (PLL, Three-Pha...

8 maanden ago | 1

| accepted

Switching and Conduction losses of MOSFET
lossesTable = ee_getPowerLossSummary(node) calculates dissipated power losses and switching losses for semiconductor blocks in a...

9 maanden ago | 0

| accepted

how should I model the grid for the electrical supply for my Electrolyzer?(simscape)
Probably the best place to start is this example in Simscape Electrical: https://www.mathworks.com/help/sps/ug/green-hydrogen-m...

9 maanden ago | 0

Battery Short Circuit Current
That is the short circuit current. As there is no short circuit until 30s the current remains to 0 (Switch is open from 0 to 30s...

9 maanden ago | 1

how to make flux based model + inverter
This system can be modeled in Simscape Electrical with existing blocks (PMSM or FEM-Parameterized PMSM and Converter (Three-Phas...

9 maanden ago | 0

i need a model of synchronous machines with dampers windinf
Simscape Electrical offers synchronous machine models with both damper windings and without. For synchronous machines with damp...

9 maanden ago | 0

Automatic Transfer Switch Model
Simscape and Simscape Electrical provide the option to model a transfer switch. The easiest way is to use a circuit breaker (sin...

10 maanden ago | 0

What can I learn from Mathway's "Three-Phase Systems and Machines"?
This page aims to show how to simulate a three-phase power system containing electrical machines and other three-phase models. ...

10 maanden ago | 0

DC Microgrid modeling and control
Simscape Electrical is provinding many examples in the microdgrid area that can be used as a starting point. Check for example: ...

10 maanden ago | 0

Error with running a Simulink model.
Without the files is not easy to tell where the problem is. I suspect when you run the first model some parameters from the work...

10 maanden ago | 0

Direct matrix converter with svm control
A good starting point is Simscape Electrical. You can check this example: https://www.mathworks.com/help/sps/ug/three-phase-mat...

10 maanden ago | 0

How we modeling PWM inverter with PI and PR current controllers with grid connection
There is not such thing as the best controller. It all depends on specific requirements. For a starting point with grid connecte...

10 maanden ago | 0

vector control of of WRSM ( wound rotor synchronous motor
From the diagram is difficult to spot the issue as everything is in a subsystem. I assume there is a sign mismatch somewhere. Fo...

10 maanden ago | 0