Answered
fsk modulator and demodulator
Walter is right - when you add noise(3) to the signal you are not actually adding random noise, you're just adding some positive...

meer dan 13 jaar ago | 1

| accepted

Answered
Inoperability between Mac (Intel) and Windows
'filt' is the name of a function in the Control System Toolbox: >> doc filt Perhaps the Mac does not have Control System...

meer dan 13 jaar ago | 2

| accepted

Answered
Why do I get the errors "Missing operator, comma, or semicolon" and "eval(['dbstop in ' mfile ' at ' num2str(line_num)])"?
If you look at the submission's page on the File Exchange, the author says this: "Note for users who get stuck by the IMVIEW ...

meer dan 13 jaar ago | 0

Answered
How to get the coefficients from FDA Tool block (Simulink) using Matlab Command?
If you right-click on the Digital Filter Design block (FDATool block) and 'Look Under Mask', you will see that the block contain...

meer dan 13 jaar ago | 0

| accepted

Answered
Butterworth Notch Filters
For higher order filters (possibly starting as low as order 8), numerical problems due to roundoff errors may occur when forming...

meer dan 13 jaar ago | 3

| accepted

Answered
Plot two graphs in one scope
You could use <http://www.mathworks.com/help/releases/R2011a/toolbox/simulink/ug/bq_5wvg-1.html Model Referencing> to include th...

meer dan 13 jaar ago | 0

Answered
Getting undefined model variables
You could place something like this in the InitFcn callback of your model: if ~exist('a', 'var') % If 'a' is not initialize...

meer dan 13 jaar ago | 0

Answered
i am having simulink model build in matlab6.1 version but now when i try to open it in matlab 7.6 version it shows 'bad link" and the error is -does not found powerlib2..". how i can open that model file that was build 5 years back in matlab6.1 version
You should open the model in MATLAB R2006b or earlier and use the PSBUPDATE function to convert the powerlib2 blocks to powerlib...

meer dan 13 jaar ago | 2

Answered
Guitar SImulation
The Signal Processing Toolbox has a nice demo that shows how to use filters to create guitar chords. To bring up the GUI, type:...

meer dan 13 jaar ago | 0

| accepted

Answered
High pass butterworth filter
You are converting the cutoff frequency to radians while leaving the Nyquist rate in Hz. Try this: fc=0.1;% cut off freq...

meer dan 13 jaar ago | 0

Answered
What exactly is the 'Sample time' (Ts) and 'Samples per frame' variables in the Bernoulli bit generator?
If the output of the Bernoulli Binary Generator block is set to sample-based, then 'Ts' is the amount of time between consecutiv...

meer dan 13 jaar ago | 2

| accepted

Answered
time interval between fft1 and fft2
When you say "time difference", do you mean the difference in execution time between the two routines? tic B=ampl_fft(A)...

meer dan 13 jaar ago | 0

| accepted

Answered
Simulink Embedded MATLAB Function
When you call FSOLVE from Embedded MATLAB it is called as an extrinsic function, meaning the return type is an mxArray. To use ...

meer dan 13 jaar ago | 0

| accepted

Answered
How to use 'set_param' command for Sample Time parameter in Bernoulli Binary Generator?
The correct parameter name is 'Ts'. You can view a list of the block's parameters like this: get_param([my_model '/Berno...

meer dan 13 jaar ago | 0

| accepted

Answered
array assignment question
So you just want to flip the horizontal orientation of b before you insert it into the same location in a? a(topRow:topRow+...

meer dan 13 jaar ago | 1

Answered
Problem with matrix manipulation
You can use the <http://www.mathworks.com/access/helpdesk/help/techdoc/ref/size.html SIZE> function to check how many rows are i...

meer dan 13 jaar ago | 0

| accepted

Answered
fprintf function
Try opening your text file like this: object = fopen('file.txt', 'w'); This will specify that the file object is to be used ...

meer dan 13 jaar ago | 0

Answered
Simulink time samples
Is there a reason that you couldn't use a fixed-step solver (with step size 0.001s) instead of a variable-step solver? That way...

meer dan 13 jaar ago | 1

Answered
Halfband and FIR filter for decimation
First of all, REMEZ is an obsolete function for designing an equiripple FIR filter. You should use <http://www.mathworks.com/ac...

meer dan 13 jaar ago | 0

Answered
Implementing QPSK modulation and Demodulation
The Bernoulli generator block is only going to generate a square wave with a value of 0 or 1. This explains why you are only se...

meer dan 13 jaar ago | 0

| accepted

Answered
M-FSK Modulator Passband
The M-FSK Modulator Passband block hasn't been around since R14 - check out the <http://www.mathworks.com/access/helpdesk/help/t...

meer dan 13 jaar ago | 1

| accepted

Answered
Is there a way to abort Simulink simulation programatically if it takes a long time?
Walter is correct about using a timer object that is configured to fire at the end of the wait period. In the timer callback yo...

meer dan 13 jaar ago | 2

| accepted

Answered
Help splitting a matrix based on a specified column.
Try this: B=A(A(:,3) == 0, :) C=A(A(:,3) ~= 0, :)

meer dan 13 jaar ago | 5

Question


How can I identify all the changes to the configuration set between two different versions of Simulink?
I would like to know what changes have been made to the configuration set in Simulink between the version I am on and the most r...

meer dan 13 jaar ago | 1 answer | 1

1

answer

Answered
Has the algorithm for fdesign changed in Signal Processing Toolbox 6.13 (R2010a) as compared to the previous versions?
This is expected behavior. The filter designed in R2007b does not match the passband specifications very well. In Signal Proce...

meer dan 13 jaar ago | 0

| accepted

Question


Has the algorithm for fdesign changed in Signal Processing Toolbox 6.13 (R2010a) as compared to the previous versions?
I am using fdesign.decimator to design an equiripple filter with given specifications. I have recently upgraded from R2007b to R...

meer dan 13 jaar ago | 1 answer | 0

1

answer