Answered
How do I add FreeRTOS support in the C2000 blockset (TMS320F28388x) in MATLAB?"
Hi @Vikram, Simulink currently does not seem to offer support to integrate FreeRTOS with the C2000 Microcontroller Blockset. A...

2 maanden ago | 0

Answered
How to access / configure Simscape parameters from Multiple Simulations configuration?
Hi Mark, To access the “Percentage efficiency at rated output power” parameter, you can follow the steps provided below: Fin...

2 maanden ago | 0

Answered
Simscape Battery Onramp will not launch in browser. "License checkout failed. License Manager Error -5 . Cannot find a license for simscape_battery."
Hi @Arne, I encountered a similar issue before, but it seems to have been resolved now. The course is accessible in both MATLA...

2 maanden ago | 0

Answered
SIL Test Harness is not getting created.
Hi Anshul The "Generate code only" option in "Configuration Parameters > Code Generation > Build Process" is unchecked by defa...

2 maanden ago | 0

Answered
Problem with Simulink support package for arduino
Hi @d mc The issue you are encountering seems to be fixed in the latest update of MATLAB R2024a. I would recommend installing t...

2 maanden ago | 0

Answered
How to change baud rate for STM32 F769I-Discovery in Simulink for PiL-Simulation?
Hi Radavid, It appears that you are facing an issue with “Code Verification and Validation with PIL” at a Baud Rate higher tha...

2 maanden ago | 0

Answered
Embedded Coder Support for STM Processors add-on won't install on Matlab R2023b, Ubuntu 22.04
Hi Montso, I am able to install the “Embedded Coder Support Package for STMicroelectronics STM32 Processors” on MATLAB R2024b ...

2 maanden ago | 0

Answered
Finding the 2d canvas/figure position of a point in a 3d plotted axes [Matlab versions with HG2]
Hi @Kaidi Shao, I understand that you are trying to annotate a 3D plot in MATLAB and are encountering some issues. I assume yo...

2 maanden ago | 0

Answered
Where can I find a comprehensive explanation of the Filter Design tools available in Matlab?
Hi Steve I see you are looking for a resource on Filter Design tools and techniques in MATLAB. Here are some key points and re...

3 maanden ago | 0

Answered
UNDISTORT STEREO Images before RECTIFICATION ?
Hi @Sukhendu I assume you are using the “rectifyStereoImages” function for Stereo Image Rectification. In this case, it is not...

3 maanden ago | 0

Answered
I can not find FACTS Controller devices in SIMSCAPE Electrical 2023a. I am using academic licence to intall the product. It was there in 2020a.
Hi Hassan I understand that you are looking for the following “Power Electronics FACTS” blocks in Simscape Electrical of MATLA...

3 maanden ago | 0

Answered
Saving Pcolor/ImageSC as vector graphics with editable colors
Hi Daniel I understand that you are trying to export “pcolor” and “imagesc” plots as Vector Graphics file but facing trouble i...

3 maanden ago | 0

| accepted

Answered
Comment positionner précisément un fichier *.STP dans Simscape Multibody ?
I understand that you are trying to make some modifications to the model imported from Solidworks using the “Simscape Multibody ...

3 maanden ago | 0

Answered
Issue connecting Simulink to Arduino Nano 33 IoT
Hi @jesse I have faced a similar issue earlier and performing a clean reinstallation of the support package “MATLAB Support Pac...

3 maanden ago | 1

| accepted

Answered
Regarding the execution time in the 'Simulink Support Package for Arduino Hardware'
Hi @순호 권 Fixed-step size: Setting the ‘Fixed-step size’ to 10ms is appropriate if you want your Simulink model to run at 100Hz,...

3 maanden ago | 1

| accepted

Answered
Sensitivity Analyzer : How to use the requirement signal matching correctly
Hi @zineb liamani It seems like you are having trouble adding the experimental input signal in the "Sensitivity Analyzer App". ...

3 maanden ago | 0

Answered
Unable to run PIL simulation using ESP-32
Hi Rakesh It appears that you are facing issues with the “PIL” workflow on the ESP32 board. As per the documentation below, “C...

3 maanden ago | 0

Answered
stopping criteria for particle swarm optimization algorithm
Hi @nado The Particle Swarm Optimization stops on reaching one of the Stopping Criteria mentioned in the documentation below, w...

3 maanden ago | 0

Answered
请问filterDesigner界面中的幅值响应和幅值响应估计分别指什么，有什么不同？
Hi @天 The ‘Magnitude Response’ and ‘Magnitude Response Estimate’ in the “Filter Designer” refer to different methods of analyz...

3 maanden ago | 0

Answered
QSPI using Infineon Aurix Board for temperature sensing MAX6675
Hi Dhruv It appears that you are working with the “QSPI Controller block“ using ‘SPI Transmit and Receive’ Transfer mode from ...

3 maanden ago | 0

Answered
MATLAB Arduino Uno Simulink doesn't have option for Connected IO Mode
Hi Nadeem, I understand that you are trying to use “Normal Mode Simulation using Connected I/O” with an Arduino Uno board but ...

3 maanden ago | 0

| accepted

Answered
why can't i find simscape multibody link in solidworks toolbox even after successful installation?
It seems that you are encountering an issue with enabling the Simscape Multibody Link plugin in SolidWorks. The Simscape Multibo...

7 maanden ago | 0

Answered
DLnetwork definition and training problem with outputLayer
I understand that you are trying to train a deep learning network and export the trained network as an “ONNX” file but facing an...

7 maanden ago | 0

Answered
How di I find the FWHM of the curve and also convert the units from Watts to Decibles
I see that you are trying to determine the FWHM of the curve and want to convert the “Y-axis” values from Watt to dB. The plot a...

7 maanden ago | 0

| accepted

Answered
Specifying individual port impedances in RF toolbox.
The “s2s” function for converting S-parameters to match different port impedances has been updated in MATLAB R2023a to specify a...

7 maanden ago | 0

Answered
External Mode Open Protocol CheckData command failed
I see that you are experiencing errors during External Mode Simulation with Simulink. Similar issues to yours have been addresse...

7 maanden ago | 0

Answered
Automatic Nuclei Count tif stacks
I understand that you are encountering an issue with counting the number of nuclei in a TIF image, specifically when two nuclei ...

7 maanden ago | 0

Answered
TI C2000 Support Package: SPI Master Transfer block
The “Embedded Coder Support Package for Texas Instruments C2000 Processors” is no longer supported by MathWorks. https://www....

7 maanden ago | 0

Answered
Error when I try to run genetic algorithm on peaks function.
I see that you are attempting to apply the genetic algorithm to the peaks function and monitor the progress of points added in e...

7 maanden ago | 0

Answered
where is regressionLayer in 2024a deep learningtoolbox
It is my understanding that you are having difficulty in finding the “regressionLayer” in the Deep Network Designer of MATLAB R2...

7 maanden ago | 0