Answered
How can I define a custom BlockType in Simulink
The |BlockType| parameter cannot be customized, and is only defined by internal blocks. For your case, perhaps you could use |Ma...

bijna 10 jaar ago | 1

Answered
DLL issues with matdgns.c example
Are you attempting to run the application on a different machine from the one you compiled on? Visual Studio has runtime librari...

bijna 10 jaar ago | 0

Answered
is it possible to update the parameter of synchronous generator block in simulink through a matlab programme
Yes, you can use the <http://www.mathworks.com/help/simulink/slref/set_param.html set_param> command.

bijna 10 jaar ago | 0

Answered
Inclusion of custom ENUM file during code generation throwing error
Is the header file getting included multiple times in the generated code? If so, you may want to try using <http://en.wikipedia....

bijna 10 jaar ago | 0

Answered
Simulink block with dynamic input port width and fix output port width
According to the documentation for <http://www.mathworks.com/help/simulink/sfg/sssetinputportwidth.html ssSetInputPortWidth>: ...

bijna 10 jaar ago | 0

Answered
Real time workshop does not appear in Configuration Parameters (Matlab 2014a)
Real-Time Workshop has been renamed to "Simulink Coder" for a few releases now. The related pane in the Configuration Parameters...

bijna 10 jaar ago | 0

Answered
Faster way to run simulink simulation repeatedly for a large number of time
I think you will find the <http://www.mathworks.com/help/simulink/ug/saving-and-restoring-the-simulation-state-as-the-simstate.h...

bijna 10 jaar ago | 0

Answered
Can Simulink make blocks unviewable/uneditable to users?
Please see <http://www.mathworks.com/help/simulink/ug/protecting-referenced-models.html Protected Models>.

bijna 10 jaar ago | 0

Answered
How to call C code generated with Matlab Coder from the statisticaL package R
Please see <http://www.mathworks.com/help/fixedpoint/ug/c-code-interface-for-unbounded-arrays-and-structure-fields.html#bsp2zmx ...

bijna 10 jaar ago | 0

| accepted

Answered
how to make a loop for a simulation?
It seems like you can achieve the same result by using a Scope block with a Decimation factor of 10. Is there a reason you want ...

bijna 10 jaar ago | 0

Answered
how to use m file in simulink
Not sure what you mean by "use the plot in Simulink" - do you just need to use |x| as time and |y| as data in the model? In that...

bijna 10 jaar ago | 0

Answered
Find differences between two simulink blocks
Please see this previously answered question: http://www.mathworks.com/matlabcentral/answers/39708-tool-for-showing-difference-b...

bijna 10 jaar ago | 0

Answered
How to hide/protect my *.mdl file from the final user, who need to run it?
You may want to look into <http://www.mathworks.com/help/simulink/ug/protecting-referenced-models.html protected models>.

bijna 10 jaar ago | 0

| accepted

Answered
how to avoid rounding off error in simulink calculations?
The difference between 46.7889e5 and 46.7890e5 is 10, which is too large to be a rounding error. Most likely, what is happening ...

bijna 10 jaar ago | 0

| accepted

Answered
Significant Figures in Simulink
I'm not very familiar with this area, but it seems to me like you might need to replace your data types with <http://www.mathwor...

bijna 10 jaar ago | 0

Answered
S-Function Block and Masking Parameters
To set the number of inputs/outputs based on parameter values, you can add code such as the following to your |setup| function: ...

bijna 10 jaar ago | 0

| accepted

Answered
Invalid MEX-file, likely missing .dll
Could you please explain this statement: "libmysql.dll is exactly in the position specified" - how do you specify this path? Typ...

bijna 10 jaar ago | 0

Answered
SImple question about Simulink S function
You can use |block.CurrentTime| to get the current time in the S-function. You can use a DWork to store the current time at each...

bijna 10 jaar ago | 0

| accepted

Answered
(Simulink) Triggered Delay Line gone in 2014a. Replacements?
I don't know enough about the block, but perhaps you could try putting it inside a <http://www.mathworks.com/help/simulink/slref...

bijna 10 jaar ago | 0

Answered
How to use Matlab generated c code for High Level Synthesis ?
If you're using a synthesis tool, don't you need HDL code, and not C code? You probably should be using <http://www.mathworks.co...

bijna 10 jaar ago | 0

Answered
I have installed dSPACE 6.5 version in 2009a MATLAB. I found warning message as Real time workshop is not installed or not licensed. Anybody can tell please which tool box is responsible for connection betweeen SIMULINK and dSPACE
See <http://www.dspace.com/en/pub/home/products/sw/pcgs/targetli.cfm dSPACE TargetLink>.

bijna 10 jaar ago | 0

| accepted

Answered
Co-simulation between Matlab and Dymola
When you say co-simulation between MATLAB and Dymola, you mean MATLAB and not Simulink right? (Because S-functions are a Simulin...

bijna 10 jaar ago | 0

Answered
How to build, connect to target and run a simulink model with GUI?
If you'd like to access data during simulation, please follow the methodology described <http://www.mathworks.com/help/simulink/...

bijna 10 jaar ago | 1

| accepted

Answered
Simulink Sfunction Error - not a valid Win32 application
My guess is that your update either wiped out your system PATH environment variable or uninstalled your Visual C++ redistributab...

bijna 10 jaar ago | 0

Answered
How can I generate a ccs project base on the **.out file which comes from matlab2013a/simulink and ccs4 ？
Project generation with Simulink is not supported for CCSv4/5, this is only possible with older versions of CCS. You need to use...

bijna 10 jaar ago | 0

Answered
SIMULINK Code Generation with USB Webcam under Ubuntu
Are you able to run the model using: >> !sudo ./model at the MATLAB prompt? If yes, it could be that libmwimaqmex.so nee...

bijna 10 jaar ago | 0

Answered
How can I replace ksdensity for c++ generation with the Matlab Coder ?
I don't know of a MATLAB function equivalent that is supported for code-generation, but if you are able to find a C implementati...

bijna 10 jaar ago | 0

| accepted

Answered
How to set temporary variables as Gain parameters in Simulink ?
The SIM command looks for variables in the base workspace by default. In this case, 'x' is present in the caller functions works...

bijna 10 jaar ago | 0

| accepted

Answered
What is a non-inlined S function
Please see the documentation for <http://www.mathworks.com/help/rtw/ug/s-functions-for-code-generation.html#f53130 Noninlined S-...

bijna 10 jaar ago | 0

Answered
Error : Subscripting into an mxArray is not supported.
Please see <http://www.mathworks.com/matlabcentral/answers/122167-subscripting-into-an-mxarray-is-not-supported this previously ...

bijna 10 jaar ago | 0