Answered
Raspberry and MATLAB with MPU9250
Hi, Connecting to MPU-9250 sensor on Raspberry Pi hardware in MATLAB can be done using mpu9250 object. This feature is support...

ongeveer 2 jaar ago | 0

Answered
Read and Parse NMEA Data Directly From GPS Receiver-No example
Hi, nmeaParser in Navigation toolbox can be used to parse sentences compliant with NMEA 0183 Standard, Version 4.10. It suppor...

meer dan 2 jaar ago | 0

Answered
Modeling accelerometer and gyroscope in simulink
https://in.mathworks.com/help/supportpkg/arduino/ref/mpu6050imusensor.html Hope this helps Thanks

meer dan 3 jaar ago | 0

Answered
Incorrect I2C device connected. Expected I2C addresses: [0x0C]. Detected I2C addresses: [0x69].
Hey Is the AD0 pin of the sensor connected to high? Can you try creating the object by specifying the I2C addresses imu = mp...

bijna 4 jaar ago | 0

Answered
Calculating Vibrational frequency with MPU 6050
Hi, Could you try setting the SampleRate of the imu object and use read() >> imu = mpu9250(a,"SampleRate",190); >> tt = imu....

bijna 4 jaar ago | 0

Answered
MPU-6050 accelerometer reading of one direction
Hi accelReadings(1) should give you the x values. If you have a license for Sensor Fusion and Tracking toolbox or Navigation t...

bijna 4 jaar ago | 0

| accepted

Answered
How to import raw data mpu6050 directly from serial monitor to matlab?
The below link will help you in interfacing mpu650 connected to arduino: https://www.mathworks.com/help/supportpkg/arduinoio/re...

ongeveer 4 jaar ago | 0

Answered
how I can get 2 mpu6050 data from arduino to matlab!
Hi, From R2019a, to read the data from mpu6050 connected to arduino, the below code can be used: Please refer the below link f...

ongeveer 4 jaar ago | 0

Answered
interface mpu6050 with matlab
Hi, The below link will be helpful for you.It explains how to read data from mpu6050 sensor connected to Arduino https://www.m...

ongeveer 4 jaar ago | 1

Answered
Read and Parse NMEA Data Directly From GPS Receiver-No example
Hi, The example is available in R2019b. Can you try in R2019b. If you are using R2019b, executing the below command will add ...

ongeveer 4 jaar ago | 0

| accepted

Answered
Having difficulty with installation process
Hi, You could contact Support for installation issues as well. Please refer the below link. There are some self-help resource...

meer dan 5 jaar ago | 0

| accepted

Answered
Hello How can I program TI C2000 LaunchXL F28379D to accept inputs from 3 potentiometers and control a GPIO pin accordingly?
Hi, You will have to install <https://www.mathworks.com/help/supportpkg/texasinstrumentsc2000/index.html Embedded Coder Suppo...

meer dan 5 jaar ago | 0

| accepted

Answered
I have created a uitable in appdesigner. Is there anyway to highlight specific rows?
Hi, This link may have some information useful for you. <https://www.mathworks.com/matlabcentral/answers/31220-uitable> ...

meer dan 5 jaar ago | 0

Answered
When to Use imadjust and when to use histeq
Hi, The below link might be helpful for you: <https://www.mathworks.com/matlabcentral/answers/267371-what-is-the-differenc...

meer dan 5 jaar ago | 0

Answered
get data and plot graph from multiples termocouples in Arduino
Hi Angel, Since you are printing the data to Serial monitor using Arduino IDE, you could create a serial object in MATLAB to ...

meer dan 5 jaar ago | 0

| accepted

Answered
Can anyone please tell me how model this following script in simulink?
Hi, Could you check out MATLAB Function block? Please refer the below documentation to know more about this block: <https:...

meer dan 5 jaar ago | 0

Answered
What code is to be used when I want to calculate the CVaR contribution of an assets i to an equally weighted portfolio?
Hi, The following link might help you get started: <https://www.mathworks.com/discovery/conditional-value-at-risk.html> ...

meer dan 5 jaar ago | 0

Answered
overlapping and coloring pictures in a sequence
Hi, If the name of the images you are trying to read differs only in some number in the name, for example name of images are ...

meer dan 5 jaar ago | 0

Answered
Creating loop to extract column from table in a cell within a cell?
Hi, Hope this example helps you get started. Suppose there is a cell array named cell_array which has 3 tables T1, T2 and T3 ...

meer dan 5 jaar ago | 1

Answered
Simulink use user-defined functions
Hi, Could you check out MATLAB Function block? Please refer the below documentation for more details: <https://www.mathwor...

bijna 6 jaar ago | 0

| accepted

Answered
Creating 1D array from frequency data/histogram?
Hi, Could you check out "histogram" command. Please refer to the below documentation to know more on this comment: <https:...

bijna 6 jaar ago | 0

Answered
Accessing NI cRIO-9045 in Matlab
Hi, The below link might be helpful for you: <https://www.mathworks.com/matlabcentral/answers/122822-accessing-ni-crio-908...

bijna 6 jaar ago | 0

Answered
Does the Simulink Support Package for Raspberry support the 3+?
Hi, Please refer to the link below to know more on Raspberry Pi models which are supported by the support package: <https:...

bijna 6 jaar ago | 0

Answered
The model that you are trying to run in External mode does not match the application running on your target. Rebuild the model, run it on your target, and start External mode simulation again.
Hi, Could you try cleaning up all the files related to the model on the Raspberry Pi and MATLAB as mentioned below. Save the ...

bijna 6 jaar ago | 0

Answered
Processor-in-the-loop Arduino simulation with double data type
Hi, Could you try adding data conversion block inside the subsystem and delete the folders that contain the generated code be...

bijna 6 jaar ago | 0

Answered
How can I set Stateflow Model Explorer properties in M-script?
Duplicate question: <https://www.mathworks.com/matlabcentral/answers/406937-how-to-set-stateflow-properties-in-stateflow-mode...

bijna 6 jaar ago | 0

| accepted

Answered
HOw do i copy a particular 4x4 cell aray into a 5x5 cell array?
Hi, Hope this example script helps you. Here I have created 2 cell arrays, excel and data. The first line of excel cell array...

bijna 6 jaar ago | 0

Solved


Times 2 - START HERE
Try out this test problem first. Given the variable x as your input, multiply it by two and put the result in y. Examples:...

bijna 6 jaar ago

Answered
Does App Designer support lcolorbar?
Hi, Please refer the below links to know more about Graphic Support by App Designer <https://www.mathworks.com/help/matlab...

bijna 6 jaar ago | 0

Answered
How to remove many NAN rows
Hi, Hope the below example helps. Let the matrix A=[1 2 3;4 5 6;NaN,NaN,NaN].If you want to remove the 3rd row of this ma...

bijna 6 jaar ago | 0

| accepted

Load more