The estimation of the displacement response of a large civil engineering structure to wind turbulence is based on the buffeting theory [1, 2, 5]. Ref.  contains the theoretical background I have used for the function dynaRespFD3. In the present script, the structure in question is a suspension bridge modelled using the theory of continuous beams . The buffeting response is computed in the frequency domain using the quasi-steady theory. Modal coupling was assumed negligible, which is generally well verified for most of the wind velocities recorded in full scale . The present script is a simplified version of the one used in .
The present script computes the lateral, vertical and torsional displacement response. A multi-modes approach is used. Some knowledge in the field of random vibration analysis and wind loading on structures are advised for proper use of this script.
The present submission contains
• dynaRespFD.m : Function that calculates the displacement response spectrum of the bridge
• A function VonKarmanSpectrum.m to generate the power spectral density of the velocity fluctuations based on von Karman model.
• Two example files Example_1.m and Example_2.m
• Two .mat files bridgeModalProperties.mat and DynamicDispl.mat that are used in the 2 examples.
Any question, comment or suggestion to improve the submission is welcomed.
 Davenport, A.G., The response of slender line-like structures to a gusty wind, Proceedings of the Institution of Civil Engineers, Vol. 23, 1962, pp. 389 – 408.
 Scanlan, R. H. (1978). The action of flexible bridges under wind, II: Buffeting theory. Journal of Sound and vibration, 60(2), 201-211.
 Thorbek, L. T., & Hansen, S. O. (1998). Coupled buffeting response of suspension bridges. Journal of Wind Engineering and Industrial Aerodynamics, 74, 839-847.
 Hjorth-Hansen, E. (1993). Fluctuating drag, lift and overturning moment for a line-like structure predicted (primarily) from static, mean loads. Wind Engineering, Lecture note no, 2.
 Cheynet, E., Jakobsen, J. B., & Snæbjörnsson, J. (2016). Buffeting response of a suspension bridge in complex terrain. Engineering Structures, 128, 474-487. http://dx.doi.org/10.1016/j.engstruct.2016.09.060
Cheynet, E. Buffeting Response of a Suspension Bridge in the Frequency Domain. Zenodo, 2020, doi:10.5281/ZENODO.3891547.
Cheynet, Etienne, et al. “Buffeting Response of a Suspension Bridge in Complex Terrain.” Engineering Structures, vol. 128, Elsevier BV, Dec. 2016, pp. 474–87, doi:10.1016/j.engstruct.2016.09.060.
Example1.mlx shows the different structural parameters required. The structural parameters are located inside the variable Bridge, which is a structure array (cf. https://se.mathworks.com/help/matlab/ref/struct.html). All you need to do is to replace the parameters used in the example by those corresponding to your bridge. The only challenge may be on "Bridge.mc" which is the lineic mass of cable (kg/m). If you have a cable-stayed bridge, you can try to see if Bridge.mc = 0 ; and Bridge.mc ~=0 has any influence of this parameter on the final result. In the example, you need also to use the quasi-static aerodynamic coefficient of your deck.
The wind velocity has not a torsional component. Example 1 shows the theoretical background. As you see, there is only two-component: The one normal to the bridge axis and the vertical bridge component. In the example, the yaw angle is zero. If you have yawed wind direction, you can project the along-wind and lateral wind component onto the component normal to the bridge axis as a first approximation.
Once again thank you for the response. My study is about cable-supported bridge which is a composite of cable and truss supporting elevated pipe over a large space. I have the results of the modal analysis which I presume can be edited in the bridgeModalProperties mat-file in the code. we also have the bridge structural variables in the m-file, how do I change these variables to accommodate my structure? I intend to determine the effect of the lateral, vertical and torsional wind components on the structure.
My intention is to draw from your wealth of knowledge as applied to my study and have your mentor-ship. Having you as a coauthor is a privilege to behold but I have to respect your decision.
And again thank you for the responses. Respect!
The code is under BSD-3 licence, so you are free to use it without including me as co-author. I still need a little more specific question to know what you are wondering: you wish to study the effect of which phenomenon or variable on what? What do you mean by "along and across wind direction"?
Thank you Cheynet for your prompt response. Sorry about the limited information in the question and I also appreciate your willingness to share knowledge. I wanted you to assist with the guide for editing the code to enable the evaluating the effect along and across wind direction, is it possible? Is it also possible to have you as a coauthor of the paper that will arise as part of my study?
Once again thank.
You are free to ask questions. Nevertheless, your question is not specific enough to allow me to evaluate if I can help you. Also, keep in mind that I'm not here to do your work, so choose your question wisely.
Hello Cheynet, thank you for sharing such a very resourceful code. I am currently working on pipe bridge and intend to evaluate the buffeting response of the structure using your code. I have done extensive evaluation of the dynamic characteristic and was able to update EMA modal properties and the numerical. I am currently looking at evaluating the effect along and across wind direction. Can I have your assistance in editing the code to satisfy my need. Your kind consideration will be very well appreciated and acknowledge.
Thank you in anticipation.
Hi Maha, I have not access to Matlab 2007 so I don't know where your problem can be. I have uploaded the submission again and specify now that it works with R2014b and more recent. I think it also works with several older version, e.g. R2012b, but ignore which older version is no longer compatible with the submission.
I have problems to run the program with matlab 2007;
Thanks for sharing. Nice
To include modal coupling, you would need to significantly modify the function dynaRespFD3. In the present case, the lateral, vertical and torsional displacement responses of the bridge girder are computed separately. To consider modal coupling, you need (1) to compute the displacement response in a single matrix, which includes, for example, the vertical and torsional motion (2) to consider off-diagonal terms that come from the aerodynamic added mass and damping. If the modal coupling is accounted for, the computation time is increased. Note that for a single-span suspension bridge and the wind conditions usually recorded (mean wind velocity lower than 25-30 m/s), the modal coupling is generally negligible.
Really nice code. Only one question:Based on your program, how can i consider Modal coupling . thinks!
Find the treasures in MATLAB Central and discover how the community can help you!Start Hunting!