Results for product_base_code:"RF Blockset" (93 results)

0

answers

Saving a Simulink file using Home Edition

Asked by Julian Martin on 9 Sep 2019
Tags

0

answers

Simulink AD9361_QPSK testbench model

Asked by Abdullah Al-khatib on 11 Jul 2019
Tags

0

answers

Where can I ask about the characteristics of the power amplifier used to generate the "simrfV2_powamp_dpd_data.mat" data given in the example "Power Amplifier Characterization with DPD for Reduced Signal Distortion"

Asked by luiza freire on 17 Jun 2019
Latest activity Commented on by Jeff Hantgan on 20 Jun 2019
Tags

0

answers

Generating uncorrelated sky noise and LNA noise in an active electronically-steered antenna model circuit envelope simulation

Asked by Tom Comberiate on 9 Oct 2018
Tags

1

answer

Changing the LO frequency of ad9361_RX block in ad9361_QPSK testbench model causes unexpected behavior

Asked by MathWorks Support Team on 13 Sep 2018
Latest activity Answered by MathWorks Support Team on 13 Sep 2018
Accepted Answer by MathWorks Support Team
Tags

0

answers

How to use the amplifier block in SimRF for simulate wireless system including TX-Channel-RX in Simulink

Asked by Trung Nguyen on 26 Apr 2018
Tags

0

answers

Generate signal with given RMSE and error distribution

Asked by Chen on 17 Jan 2018
Tags

2

answers

Hi, How to plot the output signal from "Narrowband Transmit Array" block?

Asked by salman dinani on 10 Jan 2018
Latest activity Commented on by Honglei Chen on 15 Jan 2018
Tags

2

answers

RF Blockset, S-Parameters plot correctly, but produce incorrect simulation response in Simulink

Asked by Jack Holloway on 21 Oct 2017
Latest activity Answered by Jack Holloway on 23 Oct 2017
Accepted Answer by MathWorks RF & Mixed-Signal Products Team
Tags

0

answers

RF Blockset SPST Insertion Loss

Asked by Omar Hiari on 18 Jul 2017
Latest activity Commented on by MathWorks RF & Mixed-Signal Products Team on 21 Jul 2017
Tags

1

answer

What Matlab add-ons do I need to simulate a smith chart for a matching network?

Asked by Etech on 30 Nov 2015
Latest activity Answered by Walter Roberson on 30 Nov 2015
Tags

2

answers

simRF example-direct conversion receiver

Asked by Yao on 6 Sep 2013
Latest activity Answered by Lau Zihui on 22 Jul 2015
Tags

1

answer

Getting I and Q components from square wave in simulink

Asked by Muhammad muzzammil on 21 Dec 2014
Latest activity Answered by Giorgia Zucchelli on 29 Dec 2014
Tags

1

answer

red dotted wire instead of solid black wire problem in simulink

Asked by Muhammad muzzammil on 21 Dec 2014
Latest activity Answered by Azzi Abdelmalek on 21 Dec 2014
Tags

2

answers

How to model a reference signal in RF of radar system?

Asked by Chen on 24 Jun 2014
Latest activity Answered by Chen on 26 Jun 2014
Tags

2

answers

phase shift with simrf

Asked by seme on 25 Nov 2013
Latest activity Answered by Giorgia Zucchelli on 9 Dec 2013
Tags

1

answer

What are the differences between SimRF 4.0 and RF Toolbox 2.12 (R2013a)?

Asked by MathWorks Support Team on 25 Oct 2013
Latest activity Answered by MathWorks Support Team on 25 Oct 2013
Accepted Answer by MathWorks Support Team

1

answer

.amp file definition leading warning on impedance

Asked by Changlin Chen on 12 Sep 2013
Tags

1

answer

Simulink S-Parameters Plotting

Asked by Mark on 10 Aug 2013
Tags

1

answer

No Solver Block Connected Error

Asked by Nicholai on 3 May 2013
Tags

1

answer

How do I measure the group delay of a 2-port series connection in SimRF 3.0.2 (R2011a)?

Asked by MathWorks Support Team on 23 Apr 2013
Accepted Answer by MathWorks Support Team

1

answer

Which mixer (Circuit Envelop/ Idealized baseband/ Equivalent Baseband from SimRF blocksets) is best suited for single carrier frequency input with imperfections such as noise/clipping in SimRF 3.2 (R2012a)?

Asked by MathWorks Support Team on 16 Jan 2013
Accepted Answer by MathWorks Support Team

1

answer

How do I remove a carrier frequency from a signal to see only the baseband signal using the RF Blockset?

Asked by MathWorks Support Team on 7 Jan 2013
Accepted Answer by MathWorks Support Team
Tags

0

answers

Incompatibility of Sim RF toolbox with distributed computing?

Asked by Miquel Testar on 19 Oct 2012
Tags

0

answers

Amplifier with supply voltage

Asked by Janez on 20 Aug 2012
Tags

1

answer

student version of simRF & RF toolbox

Asked by apchar on 17 Jul 2012
Tags

0

answers

In RFBlockset / Input Port': Initialization commands cannot be evaluated.

Asked by Harold Jang on 19 Jun 2012
Tags

1

answer

How can I analyze the output waveform at various points in a RF receiver model with and without a shunt resistor in SimRF 3.0 (R2010b) ?

Asked by MathWorks Support Team on 10 May 2011
Accepted Answer by MathWorks Support Team

1

answer

Why does the "Mixer" block from the RF Blockset 2.3 (R2008b) not change the center frequency of the input signal?

Asked by MathWorks Support Team on 28 Oct 2009
Accepted Answer by MathWorks Support Team

1

answer

Is it possible to model a SPDT switch in the Simulink RF Blockset 2.4 (R2009a)?

Asked by MathWorks Support Team on 3 Sep 2009
Accepted Answer by MathWorks Support Team
Tags

1

answer

Does the "Load Impedance" field in the "Output Port" block accept complex numbers in RF Blockset 2.3 (R2008b)?

Asked by MathWorks Support Team on 27 Jun 2009
Accepted Answer by MathWorks Support Team
Tags

1

answer

Can I find the corresponding LC parameters in RF Blockset 1.0.2 (R14SP1) given the filter parameters?

Asked by MathWorks Support Team on 27 Jun 2009
Accepted Answer by MathWorks Support Team
Tags

1

answer

What is the default value of input impedance for mathematical blocks of Communications and RF Blocksets?

Asked by MathWorks Support Team on 27 Jun 2009
Accepted Answer by MathWorks Support Team
Tags

1

answer

How can I access the example model "noise_amplitude_ex" in RF Blockset 2.4 (R2009a)?

Asked by MathWorks Support Team on 27 Jun 2009
Accepted Answer by MathWorks Support Team

1

answer

Why do I receive a "Sample time of input to RF block incorrectly specified" error, even though all my sample times are correctly specified, when using the RF Blockset 2.0 (R2007a)?

Asked by MathWorks Support Team on 27 Jun 2009
Accepted Answer by MathWorks Support Team

1

answer

What functionality is afforded by ssSetModelReferenceSampleTimeDefaultInheritance and ssSetModelReferenceSampleTimeDisallowInheritance in C MEX S-functions in Simulink?

Asked by MathWorks Support Team on 27 Jun 2009
Accepted Answer by MathWorks Support Team
Tags

1

answer

How do I calculate the input power into the amplifier when using the RF Blockset?

Asked by MathWorks Support Team on 27 Jun 2009
Accepted Answer by MathWorks Support Team

1

answer

Should the Coaxial Transmission Line block include the parameter tangential dielectric loss in RF Blockset 2.2 (R2008a)?

Asked by MathWorks Support Team on 27 Jun 2009
Accepted Answer by MathWorks Support Team

1

answer

Why do I receive different results when I set the maximum FIR filter length to a number that is not a power of 2 in RF Blockset?

Asked by MathWorks Support Team on 27 Jun 2009
Accepted Answer by MathWorks Support Team
Tags

1

answer

Is it possible to allow the RF Blockset Input Port block to inherit its sample time in the RF Blockset?

Asked by MathWorks Support Team on 27 Jun 2009
Accepted Answer by MathWorks Support Team
Tags

1

answer

Where can I find more information about the implementation of the General Mixer block in RF Blockset 1.0.2 (R14SP1)?

Asked by MathWorks Support Team on 27 Jun 2009
Accepted Answer by MathWorks Support Team
Tags

1

answer

Why do I receive artifacts, associated with finite frequency grid and aperiodic input signals, that lead to wrong answers in BER plots when using the RF Blockset 1.3.1 (R2006b)?

Asked by MathWorks Support Team on 27 Jun 2009
Accepted Answer by MathWorks Support Team

1

answer

Why do the plots from the SPARAM_AMP demo not match expectations in RF Blockset 2.1 (R2007a)?

Asked by MathWorks Support Team on 27 Jun 2009
Accepted Answer by MathWorks Support Team