配列インデックスのエラーメッセージについて

154 views (last 30 days)
kazuma kaneda
kazuma kaneda on 27 Oct 2019
Commented: Ganchimeg on 18 Jul 2023
下記のようなプログラムで、エラーメッセージが出ます。どのように直せば良いですか。
>> x=2*pi*(0:0.001:1);
>> tic
>> for j=0:0.0001:1
y1(j)=cos(x(j));
end
配列インデックスは正の整数または logical 値でなければなりません。
>> time1=toc

Accepted Answer

Yoshio
Yoshio on 27 Oct 2019
Edited: Yoshio on 27 Oct 2019
MATLABAの配列は、Cと異なりインデックスは1から始まりますので、配列xの最初の要素はx(1)です。
このため、for文でx(0)を参照したため、エラーとなっています。
以上を参考にコードを見直してみてください。
なお、MATLABの強みは、関数の入力として、ベクトルや行列を扱うことができることです。
forを使ったコードができたら、forを使わないで計算する方法も検討してみてください。
  2 Comments
kazuma kaneda
kazuma kaneda on 27 Oct 2019
ありがとうございました。無事に、実行できました。
Yoshio
Yoshio on 28 Oct 2019
一点追加ですが、エラーメッセージの意味ですが、
配列インデックスは正の整数
ですので、j=0:0.0001:1でx(j)は「配列のインデックス指定が正の整数」ではないので、
x(0)を参照したエラーとx(0.0001) の両方を回避する必要があります。x(0)だけではありませんのでご注意ください。

Sign in to comment.

More Answers (1)

Ganchimeg
Ganchimeg on 18 Jul 2023
clear clc phi1_Link(1)=0; %一般化座標 phi1_dot_Link(1)=0; %一般化速度 phi1_ref(1)=-45/180*pi; %目標関節角度 phi_motor(1)=0; omega_motor(1)=0; phi1_dot_ref(1)=0; %目標関節各速度 phi1_dot_motor(1)=0; K_p=1.5949*10^3; % C_v=0.1546; % %K_f=54.83; %Pゲイン %C_f=1.5889; %Dゲイン K_f=54.83; %Pゲイン C_f=1.5889; %Dゲイン dTime=0.001; %シミュレーション刻み幅 TotalTime=2; %シミュレーション時間 Time=TotalTime/dTime; M_total=1.612; M=M_total/2; G=-9.8; l=0.3; l_a=0.0125; %各リンクの慣性テンソル r=0.02; %円柱の半径 I=1/4*M*r^2+1/12*M*0.3^2; I_m=(1/3)*M*(l_a^2+l_a*l+l^2); for i=1:dTime:TotalTime
tau_motor(i)=K_p*((phi1_ref(i)-phi1_Link(i)))-C_v*(phi1_dot_ref(i)-phi1_dot_Link(i)); tau_SEA(i)=K_f*(phi_motor(i)-phi1_Link(i))+C_f*(phi1_dot_motor(i)-phi1_dot_Link(i)); a_motor(i)=(tau_motor(i)-tau_SEA(i))/I_m; omega_motor(i+1)=omega_motor(i)+ a_motor(i)*dTime; phi_motor(i+1)=phi_motor(i)+omega_motor(i)*dTime; %リンクのダイナミクス tau_g(i)=M_total*G*(l/2)*sin(phi1_Link(i)); a_Link(i)=(tau_SEA(i)-tau_g(i))/I; phi1_dot_Link(i+1)=phi1_dot_Link(i)+ a_Link(i)*dTime; phi1_Link(i+1)=phi1_Link(i)+phi1_dot_Link(i)*dTime; end figure(1) plot(Time, phi1_Link) legend('theta_1') title('Link1の角度') figure(2) plot(Time, phi1_dot_Link) legend('theta_dot_1') title('Link1の角速度') figure(3) plot(Time, phi_motor) legend('theta_motor') title('Motorの角度') figure(4) plot(Time, omega_motor) legend('omega_motor') title('Motorの角速度')
  1 Comment
Ganchimeg
Ganchimeg on 18 Jul 2023
これを実行させたら (配列インデックスは正の整数またはlogical値でなければなりません。) このようなエラーが出ましたが、どのように解決すれば宜しいでしょうか?

Sign in to comment.

Categories

Find more on Creating and Concatenating Matrices in Help Center and File Exchange

Products

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!