how to plot the real time data from arduino in matlab.
253 views (last 30 days)
Nick on 7 Apr 2017
Hi this is some old code I have that will plot the Arduino's analogread output. It will read continuously until it is stopped. I should also say that when I used the Arduino, the support package was not available so I was grabbing my data from the Arduino a different way (analogRead) than you might depending how you are connected to the Arduino.
%This is a script that will plot Arduino analogRead values in real time
%Modified from http://billwaa.wordpress.com/2013/07/10/matlab-real-time-serial-data-logger/
%The code from that site takes data from Serial
%User Defined Properties
a = arduino('Com13') % define the Arduino Communication port
plotTitle = 'Arduino Data Log'; % plot title
xLabel = 'Elapsed Time (s)'; % x-axis label
yLabel = 'Temperature (C)'; % y-axis label
legend1 = 'Temperature Sensor 1'
legend2 = 'Temperature Sensor 2'
legend3 = 'Temperature Sensor 3'
yMax = 40 %y Maximum Value
yMin = 0 %y minimum Value
plotGrid = 'on'; % 'off' to turn off grid
min = 0; % set y-min
max = 40; % set y-max
delay = .01; % make sure sample faster than resolution
%Define Function Variables
time = 0;
data = 0;
data1 = 0;
data2 = 0;
count = 0;
%Set up Plot
plotGraph = plot(time,data,'-r' ) % every AnalogRead needs to be on its own Plotgraph
hold on %hold on makes sure all of the channels are plotted
plotGraph1 = plot(time,data1,'-b')
plotGraph2 = plot(time, data2,'-g' )
axis([yMin yMax min max]);
while ishandle(plotGraph) %Loop when Plot is Active will run until plot is closed
dat = a.analogRead(0)* 0.48875855327; %Data from the arduino
dat1 = a.analogRead(2)* 0.48875855327;
dat2 = a.analogRead(4)* 0.48875855327;
count = count + 1;
time(count) = toc;
data(count) = dat(1);
data1(count) = dat1(1)
data2(count) = dat2(1)
%This is the magic code
%Using plot will slow down the sampling time.. At times to over 20
%seconds per sample!
axis([0 time(count) min max]);
%Update the graph
disp('Plot Closed and arduino object has been deleted');