Get radio hardware information
Get Radio Hardware Information
Make sure your radio hardware is configured for host-radio communication by following the steps in Guided Host-Radio Hardware Setup.
Create a radio object for your radio hardware. For example:
dev = sdrdev('AD936x')
dev = SDRDevAD936x with properties: IPAddress: '192.168.3.2' DeviceName: 'AD936x'
Use this object to get radio hardware information.
## Establishing connection to hardware. This process can take several seconds.
ans = struct with fields: Status: 'Full information' libiio: 'Host version: 0.17.g5bdc242' HDL: 'PCORE Version: 10.0b' Bitstream: 'Custom bitstream loaded, Path: /mnt/system.bit, MD5: 1c52c1d612b05eb53b23dd2a9474d8d2'
Before calling the
info function, make sure the SD
card configured during hardware setup is inserted into the reader of the
radio hardware. You can also configure an SD card by using the