Main Content

Troubleshoot Xilinx Zynq Platform and Development Computer Connection

Sending PING Request to Xilinx Zynq Platform

To determine if the Xilinx® Zynq® platform is properly configured, repeat the steps in TFTP/WFTPD Configuration Guide.

In a DOS command window, execute the following command.

C:\Temp> ping 192.168.88.169

A valid connection gets a response with 0% loss.

Checking the WFTPD and TFTPD Applications

To check that the WFTPD and TFTPD applications are configured correctly on your network interface, use the following MATLAB® commands. In these commands, you first create a text file in the TFTP folder used in Configure Trivial File Transfer Protocol (TFTP).

>> system('echo Hello > C:\Work\R2014b\vxtest\testfile.txt');
>> [~, status]=urlread(['ftp://192.168.88.88/', 'testfile.txt']);

If the status returns a non-zero value, the FTP was configured correctly.

To view the contents of the TFTP folder, use the PuTTY session on the Xilinx Zynq platform.

-> ls "host:"

A valid connection lists of all the files in the TFTP folder.

See Also

| |