Get Started with Communications Toolbox Support Package for USRP Embedded Series Radio
Communications Toolbox™ Support Package for USRP™ Embedded Series Radio enables you to use MATLAB® and Simulink® to prototype, verify, and test practical wireless systems. Using this support package with a USRP E310 or USRP E312 SDR, you can work with live RF signals using single (1x1) or dual (2x2) transmit and receive streams. You can also implement custom hardware designs for your SDR applications using HDL Coder™ or Embedded Coder®. This enables you to test your design under real-world conditions and rapidly prototype designs for mobile and embedded applications.
Tutorials
- Reception of a Tone Signal Using USRP E3xx
Perform a simple loopback of a complex sinusoid signal.
- Transmit and Receive LTE Signals Using USRP E3xx
Generate multi-antenna LTE transmission for simultaneous transmit and receive on a single SDR device.
About USRP Embedded Series Radio Design
- Hardware and Software Requirements
Get an overview of supported hardware and required software products.
- SDR Hardware Architecture
Overview of SDR hardware reference design.
- Compatibility with Previous Releases
Learn how to update an existing design based on features removed in R2020a.
Videos
RF Signal Capture Using MATLAB and SDR
Capture RF signals off the air using SDR hardware and Communications Toolbox support packages.