Output state of touch sensor
Simulink® Support Package for LEGO® MINDSTORMS® EV3 Hardware
Detect whether the EV3 Touch Sensor is being pressed:
0 = Not pressed
1 = Pressed
The block output emits values as uint8.
During simulations without hardware, this block emits zeros. See Block Produces Zeros or Does Nothing in Simulation.
Select the EV3 sensor port to which the sensor is connected.
Avoid assigning multiple devices to the same port. The options are
Specify how often the block reads sensor values.
Smaller values require the processor to complete the same number of instructions in less time, which can cause task overruns.