Measures elapsed time from timer in EV3 brick
Simulink® Support Package for LEGO® MINDSTORMS® EV3 Hardware
The Timer block measures the elapsed time, in milliseconds, from when the LEGO MINDSTORMS EV3 brick starts running the model.
You can see when the EV3 brick starts running a model by observing the LCD on the
EV3 brick. For models that do not use the Display block, the LCD on the EV3 brick
I am running followed by the model name. For models that
use the Display block, the model displays
whatever output is sent to it.
During simulations without hardware, this block outputs zeros. See Block Produces Zeros or Does Nothing in Simulation.
legoev3lib block library as described in
Open Block Library for LEGO MINDSTORMS EV3 Hardware.
Copy the Timer and the Display blocks to a new model and connect these blocks.
Prepare and run the model on the EV3 brick as described in Run Model on EV3 Hardware. Observe the elapsed time, in milliseconds, on the LCD display.
Specify how often the block reads timer values. This value defaults to
0.1. Shorter sample times, such as
0.01, may produce unreliable measurements.
Smaller values require the processor to complete the same number of instructions in less time, which can cause task overruns.