This example shows how to use Audio Capture and Audio Playback blocks from the Simulink® Support Package for Apple iOS Devices to implement a parametric audio equalizer algorithm with a Simulink model and run the model on an iOS device.
Parametric equalizers are used to adjust the frequency response of audio systems. For example, a parametric equalizer can be used to compensate for biases with specific speakers that have peaks and dips at different frequencies.
In this example, you will implement a parametric audio equalizer with a Simulink model and then run that model on an iOS device. The parametric equalizer algorithm in this example provides three second-order (bi-quadratic) filters whose coefficients can be adjusted to achieve a desired frequency response. A graphical user interface (GUI) is used in simulation to dynamically adjust filter coefficients and explore behavior.
The following sections will describe how the parametric equalizer algorithm is specified, how the performance can be assessed through simulation, and how the model is run on an iOS device. You will also learn how the Audio Capture and Playback blocks are used to input and output audio signals.
We recommend completing Getting Started with Apple iOS Devices and Communicating with Apple iOS Devices examples.
DSP System Toolbox™
iPhone, iPod or iPad
USB cable to connect the device to host computer
Headphones with microphone
Connect a speaker or headphones to the headphone jack of your iOS device. The audio captured from the microphone will be equalized on the device and sent to the speakers/headphones.
In this task, you will configure and run the parametric equalizer model on the device.
1. Open the Parametric Audio Equalizer model.
2. In your Simulink model, click Simulation > Model Configuration Parameters to open Configuration Parameters dialog.
3. Select the Hardware Implementation pane and review the parameters on the page that opens.
4. In the Simulink model, double-click on the Audio Capture block. Note that the Audio sampling frequency is set to 44100 Hz and the Frame size is set to 4410. With these settings, the Equalizer algorithm processes 4410/44100(Hz) = 0.1 seconds of audio data at each sample time hit.
5. In the model, make sure that the Simulation mode on the toolbar is set to External.
6. In the model, click the Run button on the toolbar to run the model on the device.
1. As the model is running on the device, you will hear audio from the speakers/headphones connected to the device.
2. A GUI displaying the frequency response of the audio equalizer will appear as shown in the picture below:
3. Click and drag the markers or lines in the Three Band Equalizer GUI to specify the desired filter response characteristics. Note the change in audio output as the frequency response of the equalizer changes.
4. Press the Stop button on the model to stop model execution.
Change the volume of the sound sent to speakers/headphones by tuning the appropriate parameter in the model.
Try more advanced iOS device audio application examples in section Deployment to Apple iOS Devices from Audio Toolbox examples.
This example showed a Simulink model of a parametric audio equalizer. Using External mode, equalizer settings were changed in real-time as the model executed on an iOS device.