Main Content

Number of bits: pointer

Pointer bit length for test hardware

Model Configuration Pane: Hardware Implementation

Description

Specify the bit length of pointer data for the hardware that you use to test code.

Selecting a device by using the Device vendor and Device type parameters sets a device-specific value for this parameter.

Dependencies

This parameter is enabled only if you can modify it for the selected hardware.

Settings

64 (default) | 8 | 16 | 24 | 32 | 40 | 48 | 56

The pointer bit length must be an integer multiple of 8 that is less than or equal to 64. Different devices have different settings available for this parameter.

Recommended Settings

ApplicationSetting
DebuggingNo impact
TraceabilityNo impact
EfficiencyNo impact
Safety precaution

No impact when Test hardware is the same as production hardware is selected. If it is not selected, no recommendation.

Programmatic Use

Parameter: TargetBitPerPointer
Type: integer
Values: 8 | 16 | 24 | 32 | 40 | 48 | 56 | 64
Default: 64

Version History

Introduced in R2010a