Update values of
DampingRatio properties given desired step response
Create Joint-Space Motion Model
This example shows how to create and use a
jointSpaceMotionModel object for a manipulator robot in joint-space.
Create the Robot
robot = loadrobot("kinovaGen3","DataFormat","column","Gravity",[0 0 -9.81]);
Set Up the Simulation
Set the timespan to be 1 s with a timestep size of 0.01 s. Set the initial state to be the robots, home configuration with a velocity of zero.
tspan = 0:0.01:1; initialState = [homeConfiguration(robot); zeros(7,1)];
Define the a reference state with a target position, zero velocity, and zero acceleration.
targetState = [pi/4; pi/3; pi/2; -pi/3; pi/4; -pi/4; 3*pi/4; zeros(7,1); zeros(7,1)];
Create the Motion Model
Model the system with computed torque control and error dynamics defined by a moderately fast step response with 5% overshoot.
motionModel = jointSpaceMotionModel("RigidBodyTree",robot); updateErrorDynamicsFromStep(motionModel,.3,.05);
Simulate the Robot
Use the derivative function of the model as the input to the
ode45 solver to simulate the behavior over 1 second.
[t,robotState] = ode45(@(t,state)derivative(motionModel,state,targetState),tspan,initialState);
Plot the Response
Plot the positions of all the joints actuating to their target state. Joints with a higher displacement between the starting position and the target position actuate to the target at a faster rate than those with a lower displacement. This leads to an overshoot, but all of the joints have the same settling time.
figure plot(t,robotState(:,1:motionModel.NumJoints)); hold all; plot(t,targetState(1:motionModel.NumJoints)*ones(1,length(t)),"--"); title("Joint Position (Solid) vs Reference (Dashed)"); xlabel("Time (s)") ylabel("Position (rad)");
jointSpaceMotionModel object, which defines the properties of
the motion model.
 Ogata, Katsuhiko. Modern Control Engineering 4th ed. Englewood Cliffs, NJ: Prentice-Hall, 2002.