Eigenvalues and Eigenmodes of L-Shaped Membrane: PDE Modeler App
This example shows how to compute all eigenmodes with eigenvalues smaller than 100 for the eigenmode PDE problem
–Δu = λu
on the geometry of the L-shaped membrane. The boundary condition is the Dirichlet condition u = 0. This example uses the PDE Modeler app. For a programmatic workflow, see Eigenvalues and Eigenmodes of L-Shaped Membrane.
To solve this problem in the PDE Modeler app, follow these steps:
Draw a polygon with the corners (0,0), (–1,0), (–1,–1), (1,–1), (1,1), and (0,1) by using the
Check that the application mode is set to Generic Scalar by selecting Options > Application.
Use the default Dirichlet boundary condition u = 0 for all boundaries. To verify it, switch to boundary mode by selecting Boundary > Boundary Mode. Use Edit > Select all to select all boundaries. Select Boundary > Specify Boundary Conditions and verify that the boundary condition is the Dirichlet condition with
h = 1,
r = 0.
Specify the coefficients by selecting PDE > PDE Specification or clicking the button on the toolbar. This is an eigenvalue problem, so select the Eigenmodes type of PDE. The general eigenvalue PDE is described by . Thus, for this problem, use the default coefficients
c = 1,
a = 0, and
d = 1.
Specify the maximum edge size for the mesh by selecting Mesh > Parameters. Set the maximum edge size value to 0.05.
Initialize the mesh by selecting Mesh > Initialize Mesh.
Specify the eigenvalue range by selecting Solve > Parameters. In the resulting dialog box, use the default eigenvalue range
Solve the PDE by selecting Solve > Solve PDE or clicking the button on the toolbar. By default, the app plots the first eigenfunction.
Plot other eigenfunctions by selecting Plot > Parameters and then selecting the corresponding eigenvalue from the drop-down list at the bottom of the dialog box. For example, plot the 12th eigenfunction in the specified range.