Disconnect device object from instrument
A device object or an array of device objects.
disconnect(obj) disconnects the device
object specified by
obj from the instrument.
Create a device object for a Tektronix® TDS 210 oscilloscope that is connected to a National Instruments™ GPIB board.
g = gpib('ni',0,2); d = icdevice('tektronix_tds210',g);
Connect to the instrument.
Get the current configuration of the oscilloscope.
values = get(d);
Disconnect from the instrument and clean up.
disconnect(d) delete([d g])
obj is disconnected from the instrument, its
Status property is configured to
You can reconnect to the instrument with the
connect function. If
obj is an array of device objects and one of the objects
cannot be disconnected from the instrument, the remaining objects in the array will
be disconnected and a warning is displayed.