Check Connectivity of Xilinx RFSoC Boards
With the USB-serial and Ethernet cable plugged in, check the connectivity of
Xilinx® RFSoC boards by using the zynqrfsocnetwork
object in
MATLAB®.
Create a zynqrfsocnetwork
object.
z = zynqrfsocnetwork
z = zynqrfsocnetwork with properties: IPAddress: '192.168.1.101'
Check the connectivity.
z.checkConnection
'Connection successful'
If the connection is unsuccessful, debug further to determine why a failure exists. To troubleshoot the connection to your target board, see "Troubleshooting" in Setup and Configuration.
If you changed the default IP address of the SD card, specify the new IP address.
z.IPAddress = 192.168.1.120