Note: This page has been translated by MathWorks. Click here to see

To view all translated materials including this page, select Country from the country navigator on the bottom of this page.

To view all translated materials including this page, select Country from the country navigator on the bottom of this page.

Both hedging functions cast the optimization as a constrained
linear least-squares problem. (See the function `lsqlin`

for
details.) In particular, `lsqlin`

attempts
to minimize the constrained linear least squares problem

$$\begin{array}{ccc}\underset{x}{{\displaystyle \mathrm{min}}}\frac{1}{2}{\Vert Cx-d\Vert}_{2}^{2}& \text{suchthat}& A\cdot x\le b\\ & & Aeq\cdot x=beq\\ & & lb\le x\le ub\end{array}$$

where *C*, *A*, and *Aeq* are
matrices, and *d*, *b*, *beq*, *lb*,
and *ub* are vectors. For Financial
Instruments Toolbox™ software, *x* is
a vector of asset holdings (contracts).

Depending on the constraint and the number of assets in the portfolio, a solution to a particular problem may or may not exist. Furthermore, if a solution is found, it may not be unique. For a unique solution to exist, the least squares problem must be sufficiently and appropriately constrained.

Recall that `hedgeopt`

allows
you to allocate an optimal hedge by one of two goals:

Minimize the cost of hedging a portfolio given a set of target sensitivities.

Minimize portfolio sensitivities for a given set of maximum target costs.

As an example, reproduce the results for the fully hedged portfolio example.

TargetSens = [0 0 0]; FixedInd = [1 4 5 7 8]; [Sens,Cost,Quantity] = hedgeopt(Sensitivities, Price,... Holdings, FixedInd, [], [], TargetSens);

Sens = -0.00 -0.00 -0.00 Cost = 23055.90 Quantity' = 98.72 -182.36 -19.55 80.00 8.00 -32.97 40.00 10.00

This example finds a unique solution at a cost of just over
$23,000. The matrix `C`

(formed internally by `hedgeopt`

and passed to `lsqlin`

) is the asset `Price`

vector
expressed as a row vector.

C = Price' = [98.72 97.53 0.05 98.72 100.55 6.28 0.05 3.69]

The vector `d`

is the current portfolio value ```
Value0
= 23674.62
```

. The example maintains, as closely as possible,
a constant portfolio value subject to the specified constraints.

In the absence of any additional constraints, the least squares objective involves a single equation with eight unknowns. This is an under-determined system of equations. Because such systems generally have an infinite number of solutions, you need to specify additional constraints to achieve a solution with practical significance.

The additional constraints can come from two sources:

User-specified equality constraints

Target sensitivity equality constraints imposed by

`hedgeopt`

The example in Fully Hedged Portfolio specifies five equality constraints
associated with holding assets 1, 4, 5, 7, and 8 fixed. This reduces
the number of unknowns from eight to three, which is still an under-determined
system. However, when combined with the first goal of `hedgeopt`

, the equality constraints associated
with the target sensitivities in `TargetSens`

produce
an additional system of three equations with three unknowns. This
additional system guarantees that the weighted average of the delta,
gamma, and vega of assets 2, 3, and 6, together with the remaining
assets held fixed, satisfy the overall portfolio target sensitivity
needs in `TargetSens`

.

Combining the least-squares objective equation with the three portfolio sensitivity equations provides an overall system of four equations with three unknown asset holdings. This is no longer an under-determined system, and the solution is as shown.

If the assets held fixed are reduced, for example, ```
FixedInd
= [1 4 5 7]
```

, `hedgeopt`

returns
a no cost, fully hedged portfolio (`Sens = [0 0 0]`

and ```
Cost
= 0
```

).

If you further reduce `FixedInd`

(for example, ```
[1
4 5]
```

, `[1 4]`

, or even `[]`

), `hedgeopt`

always returns a no cost, fully
hedged portfolio. In these cases, insufficient constraints result
in an under-determined system. Although `hedgeopt`

identifies
no cost, fully hedged portfolios, there is nothing unique about them.
These portfolios have little practical significance.

Constraints
must be *sufficient* and *appropriately
defined*. Additional constraints having no effect on the
optimization are called *dependent constraints*.
As a simple example, assume that parameter *Z* is
constrained such that $$Z\le 1$$. Furthermore,
assume that you somehow add another constraint that effectively restricts $$Z\le 0$$. The constraint $$Z\le 1$$ now has no effect on the optimization.

To illustrate using `hedgeopt`

to
minimize portfolio sensitivities for a given maximum target cost,
specify a target cost of $20,000 and determine the new portfolio sensitivities,
holdings, and cost of the rebalanced portfolio.

MaxCost = 20000; [Sens, Cost, Quantity] = hedgeopt(Sensitivities, Price,... Holdings, [1 4 5 7 8], [], MaxCost);

Sens = -4345.36 295.81 -6586.64 Cost = 20000.00 Quantity' = 100.00 -151.86 -253.47 80.00 8.00 -18.18 40.00 10.00

This example corresponds to the $20,000 point along the cost axis in the figures Rebalancing Cost Profile, Funds Available for Rebalancing, and Rebalancing Cost.

When minimizing sensitivities, the maximum target cost is treated
as an inequality constraint; in this case, `MaxCost`

is
the most you are willing to spend to hedge a portfolio. The least-squares
objective matrix `C`

is the matrix transpose of the
input asset sensitivities

C = Sensitivities'

a `3`

-by-`8`

matrix in this
example, and `d`

is a `3`

-by-`1`

column
vector of zeros,

`[0 0 0]'`

.

Without any additional constraints, the least-squares objective
results in an under-determined system of three equations with eight
unknowns. By holding assets 1, 4, 5, 7, and 8 fixed, you reduce the
number of unknowns from eight to three. Now, with a system of three
equations with three unknowns, `hedgeopt`

finds
the solution shown.

Reducing the number of assets held fixed creates an under-determined system with meaningless solutions. For example, see what happens with only four assets constrained.

FixedInd = [1 4 5 7]; [Sens, Cost, Quantity] = hedgeopt(Sensitivities, Price,... Holdings, FixedInd, [], MaxCost);

Sens = -0.00 -0.00 -0.00 Cost = 20000.00 Quantity' = 100.00 -149.31 -14.91 80.00 8.00 -34.64 40.00 -32.60

You have spent $20,000 (all the funds available for rebalancing) to achieve a fully hedged portfolio.

With an increase in available funds to $50,000, you still spend all available funds to get another fully hedged portfolio.

MaxCost = 50000; [Sens, Cost, Quantity] = hedgeopt(Sensitivities, Price,... Holdings, FixedInd, [],MaxCost);

Sens = -0.00 0.00 0.00 Cost = 50000.00 Quantity' = 100.00 -473.78 -60.51 80.00 8.00 -18.20 40.00 385.60

All solutions to an under-determined system are meaningless.
You buy and sell various assets to obtain zero sensitivities, spending
all available funds every time. If you reduce the number of fixed
assets any further, this problem is insufficiently constrained, and
you find no solution (the outputs are all `NaN`

).

Note also that no solution exists whenever constraints are *inconsistent*. Inconsistent constraints create an infeasible solution
space; the outputs are all `NaN`

.

`hedgeslf`

The other hedging function, `hedgeslf`

,
attempts to minimize portfolio sensitivities such that the rebalanced
portfolio maintains a constant value (the rebalanced portfolio is
hedged against market moves and is closest to being self-financing).
If a self-financing hedge is not found, `hedgeslf`

tries
to rebalance a portfolio to minimize sensitivities.

From a least-squares systems approach, `hedgeslf`

first
attempts to minimize cost in the same way that `hedgeopt`

does. If it cannot solve this
problem (a no cost, self-financing hedge is not possible), `hedgeslf`

proceeds to minimize sensitivities
like `hedgeopt`

. Thus, the discussion
of constraints for `hedgeopt`

is
directly applicable to `hedgeslf`

as
well.

To illustrate this hedging facility using equity exotic options,
consider the portfolio `CRRInstSet`

obtained from
the example MAT-file `deriv.mat`

. The portfolio consists
of eight option instruments: two stock options, one barrier, one compound,
two lookback, and two Asian.

The hedging functions require inputs that include the current portfolio holdings (allocations) and a matrix of instrument sensitivities. To create these inputs, start by loading the example portfolio into memory

```
load deriv.mat;
```

Next, compute the prices and sensitivities of the instruments in this portfolio.

[Delta, Gamma, Vega, Price] = crrsens(CRRTree, CRRInstSet);

Extract the current portfolio holdings (the quantity held or the number of contracts).

Holdings = instget(CRRInstSet, 'FieldName', 'Quantity');

For convenience place the delta, gamma, and vega sensitivity measures into a matrix of sensitivities.

Sensitivities = [Delta Gamma Vega];

Each row of the `Sensitivities`

matrix is associated
with a different instrument in the portfolio and each column with
a different sensitivity measure.

disp([Price Holdings Sensitivities])

8.29 10.00 0.59 0.04 53.45 2.50 5.00 -0.31 0.03 67.00 12.13 1.00 0.69 0.03 67.00 3.32 3.00 -0.12 -0.01 -98.08 7.60 7.00 -0.40 -45926.32 88.18 11.78 9.00 -0.42 -112143.15 119.19 4.18 4.00 0.60 45926.32 49.21 3.42 6.00 0.82 112143.15 41.71

The first column contains the dollar unit price of each instrument, the second contains the holdings of each instrument, and the third, fourth, and fifth columns contain the delta, gamma, and vega dollar sensitivities, respectively.

Suppose that you want to obtain a delta, gamma, and vega neutral
portfolio using `hedgeslf`

.

[Sens, Value1, Quantity]= hedgeslf(Sensitivities, Price, ... Holdings)

Sens = 0.00 -0.00 0.00 Value1 = 313.93 Quantity = 10.00 7.64 -1.56 26.13 9.94 3.73 -0.75 8.11

`hedgeslf`

returns the
portfolio dollar sensitivities (`Sens`

), the value
of the rebalanced portfolio (`Value1`

) and the new
allocation for each instrument (`Quantity`

).

If `Value0`

and `Value1`

represent
the portfolio value before and after rebalancing, respectively, you
can verify the cost by comparing the portfolio values.

Value0= Holdings' * Price

Value0 = 313.93

In this example, the portfolio is fully hedged (simultaneous
delta, gamma, and vega neutrality) and self-financing (the values
of the portfolio before and after balancing (`Value0`

and `Value1`

)
are the same.

Suppose now that you want to place some upper and lower bounds
on the individual instruments in your portfolio. By using Financial
Toolbox™ function `portcons`

, you can specify these constraints,
along with various general linear inequality constraints.

As an example, assume that, in addition to holding instrument 1 fixed as before, you want to bound the position of all instruments to within +/- 20 contracts (for each instrument, you cannot short or long more than 20 contracts). Applying these constraints disallows the current position in the fourth instrument (long 26.13). All other instruments are currently within the upper/lower bounds.

You can generate these constraints by first specifying the lower
and upper bounds vectors and then calling `portcons`

.

```
LowerBounds = [-20 -20 -20 -20 -20 -20 -20 -20];
UpperBounds = [20 20 20 20 20 20 20 20];
ConSet = portcons('AssetLims', LowerBounds, UpperBounds);
```

To impose these constraints, call `hedgeslf`

with `ConSet`

as
the last input.

[Sens, Cost, Quantity1] = hedgeslf(Sensitivities, Price, ... Holdings, 1, ConSet)

Sens = -0.00 0.00 0.00 Cost = 313.93 Quantity1 = 10.00 5.28 10.98 20.00 20.00 -6.99 -20.00 9.39

Observe that `hedgeslf`

enforces
the upper bound on the fourth instrument, and the portfolio continues
to be fully hedged and self-financing.

- Portfolio Creation
- Adding Instruments to an Existing Portfolio
- Instrument Constructors
- Creating Instruments or Properties
- Searching or Subsetting a Portfolio
- Pricing a Portfolio Using the Black-Derman-Toy Model
- Pricing and Hedging a Portfolio Using the Black-Karasinski Model
- Specifying Constraints with ConSet
- Portfolio Rebalancing