Main Content

Supported Hardware and Required Software

Supported Hardware

The Embedded Coder® Support Package for Infineon® AURIX™ TC3x Microcontrollers supports the following boards:

  • Infineon AURIX TC375 Lite Kit

  • Infineon AURIX TC387 Motor Control Kit

  • Infineon AURIX TC397 Triboard

  • Custom boards from Infineon AURIX TC37x series

  • Custom boards from Infineon AURIX TC38x series

  • Custom boards from Infineon AURIX TC39x series

Note

The Device Series in Configuration Parameters window must match the hardware board connected for deploying the application model. To change the Device Series, press Ctrl+E to open Configuration Parameters window and go to Hardware Implementation > Device Series.

Supported Third-Party Tools

To run the Embedded Coder Support Package for Infineon AURIX TC3x Microcontrollers, you will need the following third-party tools.

Third-Party ToolchainSupported VersionDescription

Infineon Low Level Driver (iLLD)

1.0.1.17.0

Follow the hardware setup window to download and install.

TASKING(R) VX-toolset for TriCore

 6.3r1

To compile and run the code. Follow the hardware setup window to download and install.

HighTec TriCore® Development Platform 4.9.4.1To compile and run the code. Follow the hardware setup window to download and install.
Synopsys® Virtualizer Runtime2.6.0To build and test your model on virtual prototyping without the Infineon AURIX hardware board. You must install both Synopsys Virtualizer Development Kit and Synopsys Virtualizer Runtime to use virtual prototyping. Follow the hardware setup window to download and install.
Synopsys Virtualizer Development KitQ-2020.06-SP2To build and test your model on virtual prototyping without the Infineon AURIX hardware board. You must install both Synopsys Virtualizer Development Kit and Synopsys Virtualizer Runtime to use virtual prototyping. Follow the hardware setup window to download and install.
Infineon DAS8.0.5To connect host computer to your hardware board for deployment of the generated code. Follow the hardware setup window to download and install.

Lauterbach (Trace32) debugger or PLS UDE Microcontroller debugger

-To debug the generated code and executables. Download and install outside the MATLAB environment.

Virtual Prototyping

The Embedded Coder Support Package for Infineon AURIX TC3x Microcontrollers is verified in Synopsys Virtual Prototyping (VP) Virtualizer.

Virtual Prototyping (VP) provides an alternative platform that can simulate all the processing units, memories and peripherals available in Infineon AURIX TC3x MCU. You can build and test your model on virtual prototyping without the hardware using the Synopsys Virtual Prototyping (VP) Virtualizer.

MathWorks Products

The following MathWorks products are required for using Embedded Coder Support Package for Infineon AURIX TC3x Microcontrollers.

  • MATLAB®

  • Embedded Coder

  • Simulink®

  • Simulink Coder™

  • Embedded Coder Support Package for Infineon AURIX TC3x Microcontrollers

Recommended Products

  • Motor Control Blockset™

  • Fixed-Point Designer™

Related Topics