Hardware Support

Ocean Optics Spectrometer Support from Instrument Control Toolbox

Acquire data and control Ocean Optics spectrometers with MATLAB.


Explore gallery (2 images)

MATLAB® supports Ocean Optics USB spectrometers. Ocean Optics manufactures a broad line of USB powered spectrometers covering the visible, near IR and UV portions of  the spectrum. These spectrometers can be used from MATLAB on Microsoft® Windows® and Linux® platforms.

Instrument Control Toolbox support for Ocean Optics spectrometers lets you use MATLAB for comprehensive control of any spectrometer that is supported by the Ocean Optics OmniDriver software (version 2.12 or higher).  With the support, you can perform hundreds of tasks in MATLAB, including:

  • Acquire a spectrum
  • Set the integration time
  • Enable dark current and non-linear spectral corrections
  • View all connected devices

You must install the Ocean Optics Omni Driver to use Ocean Optics spectrometers from MATLAB. To get the driver, see the Third-Party requirements on the right side of this page.

Devices supported include:

Devices

S2000 Spectrometer QE65000 Scientific-Grade Spectrometer
USB650 Spectrometer NIR-512 Near-IR Spectrometer
USB2000 Spectrometer NIR256-2.1 and NIR256-2.5 Near-IR Spectrometers
USB2000+ Spectrometer NIRQuest Model Spectrometers
USB2000-FLG Spectrometer Torus Spectrometer
USB4000 Spectrometer Maya2000 Spectrometer
HR2000 High-resolution Spectrometer Maya2000 Pro Spectrometer
HR2000+High-resolution Spectrometer MMS Raman Spectrometer
HR4000 High-resolution Spectrometer
ARCoptix ANIR Series FTS Spectrometers
Jaz System
STS Spectrometer

Related Hardware Support Views: Chemical and Petroleum, Earth, Ocean, and Atmospheric Sciences, Instrument Control Toolbox, Instrumentation, MathWorks Supported, MATLAB Product Family, Ocean Optics, Support Package Installer Enabled, Test and Measurement, USB

Hardware

Required

Software

Required

You must install the Ocean Optics Omni Driver to use Ocean Optics Spectrometers from MATLAB. Choose your MATLAB version and platform below to download and install the appropriate version of the OmniDriver.

R2016b – current

Windows

Mac:

* This file must be unzipped and libNatUSB.jnilib copied to /Applications/OmniDriver-2.40/OOI_HOME

R2015a and R2015b

Windows 64-bit

Windows 32-bit

Linux

R2014b and earlier

Windows 64-bit

Windows 32-bit

Linux

Don't see the hardware you're looking for?