Implement three-phase series RLC branch
The Three-Phase Series RLC Branch block implements three balanced branches consisting each of a resistor, an inductor, or a capacitor or a series combination of these. Use the Branch type parameter to select elements you want to include in each branch.
Negative values are allowed for resistance, inductance, and capacitance.
Select the elements you want to include in the branch. The R letter defines the resistor, the L letter defines the inductor, and the C letter defines the capacitor. Select Open circuit to define an open circuit (R=0, L=0, C=inf). Only existing elements are displayed in the block icon.
The branch resistances, in ohms (Ω).
The branch inductances, in henries (H).
The branch capacitances, in farads (F).
Branch voltages to measure the three
voltages across the Three-Phase Series RLC Branch block terminals.
Branch currents to measure the three
currents flowing through the Three-Phase Series RLC Branch block.
Branch voltages and currents to measure
the three voltages and the three currents of the Three-Phase Series
RLC Branch block.
Place a Multimeter block in your model to display the selected measurements during the simulation. In the Available Measurements list box of the Multimeter block, the measurements are identified by a label followed by the block name.